gPXE/BFO ?

[Chris Kloiber]

So I thought I'd give this installation method a whirl (inside 
VirtualBox) but it fails every time. Usually died at:

gPXE 0.9.9+ -- Open Source Boot Firmware -- http://etherboot.org
Features: HTTP DNS TFTP AoE iSCSI bzImage COMBOOT ELF Multiboot PXE PXEXT

Attempting to start boot.fedoraproject.org
Setting up networking...

static.gpxe: 325 bytes [script] [LOADED]
Opening first network interface ...
If you don't have DHCP, then hit Control+C to cancel
DHCP (net0 08:00:27:99:6e:d4).... ok
Here we go!
http://serverbeach1.fedoraproject.org/pub/alt/bfo/pxelinux.0.
PXELINUX 3.75 2009-04-16  Copyright (C) 1994-2009 H. Peter Anvin et al
!PXE entry point found (we hope) at 9C59:044A via plan A
UNDI code segment at 9C59 len 0814
UNDI data segment at 9CDB len 2E48
Getting cached packet 01 02 03
My IP address seems to be C0A82039 192.168.32.57
ip=192.168.32.57:192.168.37.9:192.168.32.1:255.255.254.0
TFTP prefix: http://serverbeach1.fedoraproject.org/pub/alt/bfo/
Trying to load: pxelinux.cfg/default

Is this expected to work at this point?

-- 
Chris Kloiber


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6653 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.fedoraproject.org/pipermail/test/attachments/20100415/5193db5f/attachment-0001.bin