I've got F21 branched installed on an alternate partition on
my system, and I noticed this nonsense. On F21 I get this:
enp5s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.134.30.143 netmask 255.255.255.0 broadcast 10.134.30.255
inet6 fe80::20b:eff:fe0f:ed prefixlen 64 scopeid 0x20<link>
ether 00:0b:0e:0f:00:ed txqueuelen 1000 (Ethernet)
RX packets 112 bytes 13242 (12.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 84 bytes 10207 (9.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 1 collisions 0
On F20 the same hardware (note the MAC address) gives this:
p6p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.134.30.143 netmask 255.255.255.0 broadcast 10.134.30.255
inet6 fe80::20b:eff:fe0f:ed prefixlen 64 scopeid 0x20<link>
ether 00:0b:0e:0f:00:ed txqueuelen 1000 (Ethernet)
RX packets 1233320 bytes 144491797 (137.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2058583 bytes 2951769070 (2.7 GiB)
TX errors 0 dropped 0 overruns 0 carrier 1 collisions 0
What was the point of "consistent" interface names again?