Wifi not configured.

[A.J. Werkman]

Samuel Sieb schreef op 4-4-2015 om 18:59:
> On 04/03/2015 07:56 PM, A.J. Werkman wrote:
>> I tried F22_Beta_TC6 on an Acer Aspire V15.
>>
>> I see that the Wireless adapter is connected to a kernel driver but the
>> Wireless adapter does not show up in the anaconda network configuration
>> screen. Does anyone have a suggestion how this adapter can be made
>> available? Or am I hitting a bug?
>>
> You didn't mention which install media you used.
I use local media. To investigate I booted rescue mode.
>
> Check the output of dmesg for anything related to the wifi.  Also try 
> "nmcli d" to see if it shows up there.
"nmcli d" does not show anything. Neither does "ifconfig -a".

dmesg shows:
[    0.949348] pci 0000:03:00.0: [168c:003e] type 00 class 0x028000
[    0.949386] pci 0000:03:00.0: reg 0x10: [mem 0xc4000000-0xc41fffff 64bit]
[    0.949590] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.949640] pci 0000:03:00.0: System wakeup disabled by ACPI
[    4.718135] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[   22.616014] ath10k_pci 0000:03:00.0: pci irq msi-x interrupts 8 
irq_mode 0 reset_mode 0
[   22.842480] ath10k_pci 0000:03:00.0: Direct firmware load for 
ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[   22.842493] ath10k_pci 0000:03:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/firmware-4.bin failed with error -2
[   22.842496] ath10k_pci 0000:03:00.0: could not fetch firmware file 
'ath10k/QCA6174/hw2.1/firmware-4.bin': -2
[   22.842504] ath10k_pci 0000:03:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/firmware-3.bin failed with error -2
[   22.842506] ath10k_pci 0000:03:00.0: could not fetch firmware file 
'ath10k/QCA6174/hw2.1/firmware-3.bin': -2
[   22.842513] ath10k_pci 0000:03:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/firmware-2.bin failed with error -2
[   22.842515] ath10k_pci 0000:03:00.0: could not fetch firmware file 
'ath10k/QCA6174/hw2.1/firmware-2.bin': -2
[   22.842523] ath10k_pci 0000:03:00.0: Direct firmware load for 
ath10k/QCA6174/hw2.1/board.bin failed with error -2
[   22.842526] ath10k_pci 0000:03:00.0: could not fetch board data (-2)
[   22.842528] ath10k_pci 0000:03:00.0: could not fetch firmware files (-2)
[   22.842529] ath10k_pci 0000:03:00.0: could not probe fw (-2)


This looks like some firmware file is missing in the installation 
environment?

>
> Have you had Fedora installed on this laptop before?  Did the wifi 
> work then?
No. It just came out of the box.

Koos.