disappearing modem on Digital PC 5400

James Jones jamesjones01 at mchsi.com
Fri Dec 5 06:08:41 UTC 2003


OK, a followup:

Internet Configuration Wizard failed to detect the modem. Ditto for 
wvdialconf.

The startup log says:

isapnp: Scanning for PnP cards...
isapnp: Card "Zoom Internal V90 Faxmodem"
isapnp: 1 Plug & Play card detected total

Here's what's in /proc/isapnp:

Card 1 'ZTIa001:Zoom Internal V90 Faxmodem' PnP version 1.0 Product version 0.1
  Logical device 0 'ZTIa001:Unknown'
    Supported registers 0x2
    Device is not active
    Resources 0
      Priority acceptable
      Port 0x3f8-0x3f8, align 0x7, size 0x8, 16-bit address decoding
      IRQ 4 High-Edge
      Alternate resources 0:1
        Priority acceptable
        Port 0x2f8-0x2f8, align 0x7, size 0x8, 16-bit +address decoding
        IRQ 3 High-Edge
      Alternate resources 0:2
        Priority acceptable
        Port 0x3e8-0x3e8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 4 High-Edge
      Alternate resources 0:3
        Priority acceptable
        Port 0x2e8-0x2e8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 3 High-Edge
      Alternate resources 0:4
        Priority acceptable
        Port 0x3f8-0x3f8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 3,4,5,7,2/9,10,12,15 High-Edge
      Alternate resources 0:5
        Priority acceptable
        Port 0x2f8-0x2f8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 3,4,5,7,2/9,10,12,15 High-Edge
      Alternate resources 0:6
        Priority acceptable
        Port 0x3e8-0x3e8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 3,4,5,7,2/9,10,12,15 High-Edge
      Alternate resources 0:7
        Priority acceptable
        Port 0x2e8-0x2e8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 3,4,5,7,2/9,10,12,15 High-Edge
      Alternate resources 0:8
        Priority acceptable
        Port 0x100-0x3f8, align 0x7, size 0x8, 16-bit address decoding
        IRQ 3,4,5,7,2/9,10,12,15 High-Edge
    Resources 1
      Priority preferred
      Port 0x100-0x3f8, align 0x7, size 0x8, 16-bit address decoding

/proc/interrupts says:

  0:    17929818   XT-PIC timer
  1:        5672   XT-PIC keyboard
  2:           0   XT-PIC cascade
  5:       73025   XT-PIC soundblaster
  8:           1   XT-PIC rtc
  9:       23449   XT-PIC usb-uhci, eth0
 12:       52670   XT-PIC PS/2 mouse
 14:      478728   XT-PIC ide0
 15:     3468358   XT-PIC ide1
NMI:           0
ERR:           0

Where should I look next?

	James Jones






More information about the users mailing list