tulip0 error: no mii transceiver found

Zach Wilkinson zachw at termdex.com
Fri Dec 5 19:54:56 UTC 2003


Compaq Presario with onboard DEC 2114x ....
Ethernet worked fine with Windows 2000; with Linux I get this error:

Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 11 for device 00:12.0
PCI: Sharing IRQ 11 with 00:06.0
PCI: Sharing IRQ 11 with 00:14.2
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media AUI (#18) described by a 21142 Serial PHY (2) block.
tulip0:  Index #1 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0:  Index #2 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0:  Index #3 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0: ***WARNING***: No MII transceiver found!
divert: allocating divert_blk for eth1
eth1: Digital DS21143 Tulip rev 65 at 0xd09aa000, 00:50:8B:4B:84:F1, IRQ 11.
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1

Well, I have a twisted pair cable plugged into the jack on the back of the system.  I hope that means there's a PHY somewhere.

Zach
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/users/attachments/20031205/8cdb13d2/attachment-0002.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2765 bytes
Desc: not available
Url : http://lists.fedoraproject.org/pipermail/users/attachments/20031205/8cdb13d2/attachment-0002.bin 


More information about the users mailing list