problem with RTL-8139/8139C/8139C+
Renato Ricardo de Abreu
renato at yd.com.br
Wed Dec 17 17:50:24 UTC 2003
Hi all,
I had a HP Pavilion notebook with a Realtek Card, in Red Hat 9 every
thing work fine but in Fedora core 1 not.
see my message log file:
Dec 17 13:17:51 spit-fire kernel: eth0: RealTek RTL8139 Fast Ethernet at
0xc88bd000, 00:10:60:76:89:1e, IRQ 11
Dec 17 13:17:51 spit-fire cardmgr[1576]: socket 1: CardBus hotplug device
Dec 17 13:17:52 spit-fire kernel: 8139cp: 10/100 PCI Ethernet driver
v0.3.0 (Sep 29, 2002)
Dec 17 13:17:52 spit-fire kernel: eth0: link down
Dec 17 13:17:52 spit-fire insmod:
/lib/modules/2.4.22-1.2129.nptl/kernel/drivers/net/8139cp.o: init_module:
No such device
Dec 17 13:17:52 spit-fire insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
Dec 17 13:17:52 spit-fire insmod:
/lib/modules/2.4.22-1.2129.nptl/kernel/drivers/net/8139cp.o: insmod
/lib/modules/2.4.22-1.2129.nptl/kernel/drivers/net/8139cp.o failed
Dec 17 13:17:52 spit-fire insmod:
/lib/modules/2.4.22-1.2129.nptl/kernel/drivers/net/8139cp.o: insmod 8139cp
failed
Dec 17 13:17:52 spit-fire pci.agent[2948]: ... can't load module 8139cp
Dec 17 13:17:52 spit-fire pci.agent[2948]: missing kernel or user mode
driver 8139cp
Dec 17 13:17:53 spit-fire kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x41E1
.......
the module exist :
-rw-r--r-- 1 root root 22576 Dez 17 11:36
/lib/modules/2.4.22-1.2129.nptl/kernel/drivers/net/8139cp.o
So it load 8139too and in a HI LOAD :
Dec 17 13:56:00 spit-fire kernel: NETDEV WATCHDOG: eth0: transmit timed out
Dec 17 13:56:00 spit-fire kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x41E1
Dec 17 13:56:12 spit-fire kernel: NETDEV WATCHDOG: eth0: transmit timed out
Dec 17 13:56:12 spit-fire kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x41E1
Dec 17 13:56:24 spit-fire kernel: NETDEV WATCHDOG: eth0: transmit timed out
Dec 17 13:56:24 spit-fire kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x41E1
Dec 17 13:56:36 spit-fire kernel: NETDEV WATCHDOG: eth0: transmit timed out
Dec 17 13:56:36 spit-fire kernel: eth0: link up, 100Mbps, full-duplex, lpa
0x41E1
my card description :
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Billionton Systems Inc: Unknown device 0200
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4800 [size=256]
Region 1: Memory at 11000000 (32-bit, non-prefetchable) [size=512]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I updated my Kernel yesterday !
can any one help me ?
Renato
--
I had a life before... Now a have a computer and a Orinoco Card.
More information about the users
mailing list