OOPS on modprobe 3c2000

[Zach Wilkinson]

After replacing the files specified, rebuilding, and such I get the
following output:

divert: allocating divert_blk for eth0
sk98lin: Network Device Driver v6.18
(C)Copyright 1999-2003 Marvell(R).
PCI: Enabling device 00:09.0 (0014 -> 0017)
PCI: Assigned IRQ 10 for device 00:09.0
eth0: Requested IRQ 0 is busy.
sk98lin: No adapter found.
Unable to handle kernel paging request at virtual address e0a209c8
 printing eip:
e0a1093e
*pde = 1ffa5067
*pte = 00000000
Oops: 0000
sk98lin nls_iso8859-1 udf ppp_deflate ppp_async ppp_generic slhc
via82cxxx_audio ac97_codec uart401 sound soundcore parport_pc lp parport
sg sr_mod ide-scsi s
CPU:    0
EIP:    0060:[<e0a1093e>]    Not tainted
EFLAGS: 00010006
 
EIP is at SkGmMacStatistic [sk98lin] 0x3e (2.4.22-1.2115.nptl)
eax: 000001cc   ebx: 000001c8   ecx: 00002800   edx: 000029c8
esi: d87f3904   edi: e0a1e000   ebp: 00000001   esp: d87f38c0
ds: 0068   es: 0068   ss: 0068
Process ip (pid: 32387, stackpage=d87f3000)
Stack: 00000000 00000000 00000000 00000000 00000003 c1b28000 00000000
e0a045b4
       c1b28000 e0a1e000 00000000 000001c8 d87f3904 c1b281d0 c1b281e0
0000000e
       00000000 00000000 00000002 00000000 00000000 00000000 e0a0436d
c1b28000
Call Trace:   [<e0a045b4>] GetPhysStatVal [sk98lin] 0x214 (0xd87f38dc)
[<e0a0436d>] GetStatVal [sk98lin] 0xbd (0xd87f3918)
[<e09ffc54>] MacPrivateStat [sk98lin] 0x254 (0xd87f3940)
[<e09fe583>] SkPnmiGetStruct [sk98lin] 0x3c3 (0xd87f3988)
[<e09f739f>] SkGeStats [sk98lin] 0x5f (0xd87f3c80)
[<c0216021>] rtnetlink_fill_ifinfo [kernel] 0x381 (0xd87f3cac)
[<c0216152>] rtnetlink_dump_ifinfo [kernel] 0x72 (0xd87f3ce4)
[<c021fee1>] netlink_dump [kernel] 0x51 (0xd87f3d10)
[<c022011d>] netlink_dump_start [kernel] 0xcd (0xd87f3d40)
[<c02160e0>] rtnetlink_dump_ifinfo [kernel] 0x0 (0xd87f3d50)
[<c02167b6>] rtnetlink_rcv_msg [kernel] 0x216 (0xd87f3d58)
[<c02160e0>] rtnetlink_dump_ifinfo [kernel] 0x0 (0xd87f3d68)
[<c02162e0>] rtnetlink_done [kernel] 0x0 (0xd87f3d6c)
[<c0216393>] rtnetlink_rcv [kernel] 0xa3 (0xd87f3dc4)
[<c021fd90>] netlink_data_ready [kernel] 0x60 (0xd87f3de8)
[<c021f604>] netlink_unicast [kernel] 0x264 (0xd87f3df8)
[<c021fb2b>] netlink_sendmsg [kernel] 0x1eb (0xd87f3e3c)
[<c02071f8>] sock_sendmsg [kernel] 0x78 (0xd87f3e70)
[<c0208263>] sys_sendto [kernel] 0xe3 (0xd87f3eb4)
[<c01180f8>] do_page_fault [kernel] 0x128 (0xd87f3f0c)
[<c0207bbd>] sys_socket [kernel] 0x3d (0xd87f3f64)
[<c0208bcb>] sys_socketcall [kernel] 0x18b (0xd87f3f80)
[<c01099df>] system_call [kernel] 0x33 (0xd87f3fc0)
 
 
Code: 0f b7 14 3a 09 c1 66 89 16 0f b7 04 39 66 89 46 02 31 c0 8b

Zach


On Sat, 2003-11-08 at 18:41, Xose Vazquez Perez wrote:
> Zach Wilkinson wrote:
> 
> > Downloaded patch from Syskonnect.
> > http://syskonnect.com/syskonnect/support/driver/readme/linux/patch.htm
> > 
> > I've never patched a kernel before so I'm unfamiliar with this output:
> > 
> > patching file linux/drivers/pci/pci.ids
> > Reversed (or previously applied) patch detected!  Assume -R? [n]
> > Apply anyway? [n] y
> > Hunk #1 FAILED at 2280.
> > Hunk #2 FAILED at 3387.
> > Hunk #3 FAILED at 3644.
> > Hunk #4 succeeded at 3741 (offset 18 lines).
> > Hunk #5 FAILED at 4973.
> > Hunk #6 FAILED at 6106.
> > 5 out of 6 hunks FAILED -- saving rejects to file
> > linux/drivers/pci/pci.ids.rej
> 
> well, to patch&compile a kernel is easy but not trivial.
> Syskonnect _patch_ is for a _clean_ kernel and doesn't apply well to RH kernel.
> Get http://syskonnect.com/syskonnect/support/driver/zip/linux/install-618.tar.bz2
> , replace drivers/net/sk98lin/* with these files. And rebuild it again.