Ethernet
Jeff Vian
jvian10 at charter.net
Mon Apr 12 15:38:02 UTC 2004
So your problem is ???????
bulent wrote:
> Eric Diamond wrote:
>
>> Wednesday, April 07, 2004 3:57 AM Bülent Açy'kgöz
>> wrote:
>>
>>
>>> Alexander Dalloz wrote:
>>>
>>>
>>>
>>>>> Link detected: no
>>>>>
>>>>
>>>> ^^^^^
>>>> You see that? You have no link, thus you can not
>>>>
>>>
>> successfully change
>>
>>>> anything.
>>>>
>>>> ...snip...
>>>>
>>>> Still no link! Check your cables. Check the other
>>>>
>>>
>> side of the cable,
>>
>>>> check the plug in the switch/hub/router or where it
>>>>
>>>
>> is.
>>
>>
>>> No I have link , Because I am downloading eveything
>>>
>>
>> also
>>
>>> working samba and others.
>>> Do you have any suggesstion?
>>>
>>>
>>
>>
>> Bülent,
>>
>> Could you please post your 'ifconfig -a' output?
>>
>> Eric Diamond
>> eDiamond Networking & Security
>> 303-246-9555
>> eric at ediamond.net
>>
>>
>>
>>
>>
> Hello, ifconfig output like this;
>
> [root at sbe-60 root]# ifconfig -a
> eth0 Link encap:Ethernet HWaddr 00:02:44:66:D3:32
> inet addr:144.122.85.60 Bcast:144.122.85.255
> Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:301403 errors:0 dropped:0 overruns:0 frame:0
> TX packets:115798 errors:14 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:51269291 (48.8 Mb) TX bytes:119416712 (113.8 Mb)
> Interrupt:11 Base address:0xec00
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:54794 errors:0 dropped:0 overruns:0 frame:0
> TX packets:54794 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:101928795 (97.2 Mb) TX bytes:101928795 (97.2 Mb)
>
> also,
> root at sbe-60 root]# mii-tool eth0
> eth0: 10 Mbit, half duplex, no link
> [root at sbe-60 root]# ping 144.122.199.20
> PING 144.122.199.20 (144.122.199.20) 56(84) bytes of data.
> 64 bytes from 144.122.199.20: icmp_seq=0 ttl=63 time=1.69 ms
> 64 bytes from 144.122.199.20: icmp_seq=1 ttl=63 time=1.39 ms
> 64 bytes from 144.122.199.20: icmp_seq=2 ttl=63 time=1.45 ms
> 64 bytes from 144.122.199.20: icmp_seq=3 ttl=63 time=1.27 ms
> 64 bytes from 144.122.199.20: icmp_seq=4 ttl=63 time=1.56 ms
> 64 bytes from 144.122.199.20: icmp_seq=5 ttl=63 time=1.50 ms
> 64 bytes from 144.122.199.20: icmp_seq=6 ttl=63 time=1.58 ms
>
>
> Thank you...
>
More information about the users
mailing list