FC3 SMP builds do NOT contain ext3 drivers in the build!!!!

Terry Polzin fox3ec208 at wideopenwest.com
Thu Dec 2 19:06:30 UTC 2004


On Thursday 02 December 2004 14:02, Fred Skrotzki wrote:
> Drive was low level formatted and verified before and after 3 builds.  It
> boots and works fine under single proc.  I even build it on another drive
> just to be sure.
>
> BOX is a full blown server class system.  hot swap drives, etc...
> HP LP2000r dual 1.0 Ghz P4
> 1 gig ram
>
> here is the drive config
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sda1   *           1          13      104391   83  Linux         /boot
>    ext3 /dev/sda2              14        1548    12329887+  83  Linux     /
>        ext3 /dev/sda3            1549        1809     2096482+  82  Linux
> swap    swap /dev/sda4            1810        4427    21029085    5 
> Extended
> /dev/sda5            1810        2070     2096451   83  Linux        
> /var/log ext3
>
> fstab
> LABEL=/1                /                       ext3    defaults        1 1
> LABEL=/boot             /boot                   ext3    defaults        1 2
> none                    /dev/pts                devpts  gid=5,mode=620  0 0
> none                    /dev/shm                tmpfs   defaults        0 0
> none                    /proc                   proc    defaults        0 0
> none                    /sys                    sysfs   defaults        0 0
> LABEL=/var/log1         /var/log                ext3    defaults        1 2
> LABEL=SWAP-sda3         swap                    swap    defaults        0 0
>
> Here is what is left on the screen when booting using SMP:
>
> ext3: unknown symbol journal_get_write_access
> ext3: unknown symbol journal_undo_access
> ext3: unknown symbol journal_create_access
> ext3: unknown symbol journal_destroy
> ext3: unknown symbol journal_clear_error
> ext3: unknown symbol journal_stop
> ext3: unknown symbol journal_init_inode
> ext3: unknown symbol journal_start
> ext3: unknown symbol log_wait_command
> ext3: unknown symbol journal_release_buffer
> ext3: unknown symbol journal_check_available_features
> ext3: unknown symbol journal_abort
> ext3: unknown symbol journal_restart
> insmod: error inserting '/lib/ext2.ko": -1 unknown symbol in module
> ERROR: /sbin/udevstart exited abnormally
> creating root drive
> umount /sys failed: 16
> Mounting root file system
> mount: error 19 mounting ext3
> mount: error 2 mounting none
> switching to new root
> switchroot: mount failed: 22
> umount /initrd/dev failed: 2
> Kernel panic - not syncing......


Would you send on a copy of your grub.conf.




More information about the users mailing list