1650 RAID - Fedora FC3

[Alexander Dalloz]

Am Mi, den 08.12.2004 schrieb Shane Presley um 15:12:

> Looking at the Hardware Browser, I do see a Raid Device (Dell
> PowerEdge Expandable RAID Controller 3/Di). Under hard drives, I see
> two drives (/dev/sda and /dev/sdb). It says that /dev/sda is a DELL
> PERCRAID Volume and /dev/sdb is a DELL PERCRAID Mirror.
> 
> But looking down at disk information, they haven't sync'd.  
> 
> /dev/sda has a single LVM Physical Volume.
> /dev/sdb has a bunch of NTFS volumes from the old Windows 2000 stuff
> that used to be on that drive.
> 
> Removing the first drive causes the system to halt.  So it's not mirrored yet.  
> 
> Is there a RAID Tool I should run?

> Shane

Consult the documentation for the specific RAID controller. You will
have to create RAID arrays using it's BIOS. Following site holds PDFs

http://support.dell.com/support/systemsinfo/documentation.aspx?c=us&l=en&s=gen&~cat=7&~subcat=24

Caution: be careful to not erase data on the first drive when trying to
create a RAID1 array of both disks connected! Read the documentation
carefully.

Alexander


-- 
Alexander Dalloz | Enger, Germany | new address - new key: 0xB366A773
legal statement: http://www.uni-x.org/legal.html
Fedora GNU/Linux Core 2 (Tettnang) on Athlon kernel 2.6.9-1.6_FC2smp 
Serendipity 15:37:51 up 2 days, 15:00, load average: 0.80, 0.37, 0.25 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
Url : http://lists.fedoraproject.org/pipermail/users/attachments/20041208/8a233990/attachment-0002.bin