cdrecord: power calibration error

Kari Tammi kari.tammi at 1posti.net
Thu Feb 19 10:48:25 UTC 2004


Hi

Could someone please help me with cdrecord? I cannot blank 
a CD-RW disk. See the cdrecord input and output below.

I've logged in as root, cdrom wasn't mounted. The computer 
is Dell GX100 (500 MHz, Pentium II), with HP CD-writer+ 
8100. The o.s. is Fedora Core 1.

The CD-RW's I tried are of good quality and a Windows 
machine was able to blank them. Writing a CD-R/CD-RW works 
ok. 

Cheers, Kari

[root at voitto kari]# cdrecord -blank=all -dev=0,0,0 
Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu) Copyright 
(C) 1995-2003 J?rg Schilling 
scsidev: '0,0,0' 
scsibus: 0 target: 0 lun: 0 
Linux sg driver version: 3.1.25 
Using libscg version 'schily-0.7' 
cdrecord: Warning: using inofficial libscg transport code 
version (schily - Red Hat-scsi-linux-sg.c-1.75-RH 
'@(#)scsi-linux-sg.c        1.75 02/10/21 Copyright 1997 
J. Schilling'). 
Device type    : Removable CD-ROM 
Version        : 0 
Response Format: 1 
Vendor_info    : 'HP      ' 
Identifikation : 'CD-Writer+ 8100 ' 
Revision       : '1.0g' 
Device seems to be: Generic mmc CD-RW. 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr). 
Driver flags   : MMC SWABAUDIO 
Supported modes: TAO PACKET SAO 
Starting to write CD/DVD at speed 2 in real BLANK mode for 
single session. 
Last chance to quit, starting real write    0 seconds. 
Operation starts. 
cdrecord: Input/output error. blank unit: scsi sendcmd: no 
error 
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00 
status: 0x2 (CHECK CONDITION) 
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 01 73 03 00 
00 
Sense Key: 0x3 Medium Error, Segment 0 
Sense Code: 0x73 Qual 0x03 (power calibration area error) 
Fru 0x0 
Sense flags: Blk 0 (not valid) 
cmd finished after 0.596s timeout 9600s 
cdrecord: Cannot blank disk, aborting. 


---------------------------------------------------------------------
www.1verkko.com. 1verkko - kaikkien yhteinen - jokaisen oma.





More information about the users mailing list