Problem with 3c905 + DECchip 21041 - Networkcards
Andreas Röxeisen
bluehat at gmx.at
Fri Jul 16 09:49:21 UTC 2004
Hi all,
after installing FC2 on a second box I could'nt connect to
network/internet - both cards are ok I tested this with other
Linux-Distributions (knoppix, mandrake, ...).
Hardwaredetection of FC2 are finding this cards:
3c905 100BaseTX [Boomerang] is activated and running. Pinging other
boxes in the network or any Internet-Address I get 'Destination Host
Unreachable'
DECchip 21041 [Tulip Pass 3] was not found by Network-Configurator.
After adding by hand I tried to activate this card I get 'hardware is
missing'
Any idea?
TIA
Andreas
See 'dmesg', 'lsmod' and 'modprobe.conf' below.
[START dmesg]
Linux version 2.6.5-1.358 (bhcompile at bugs.build.redhat.com) (gcc version
3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000077f0000 (usable)
BIOS-e820: 00000000077f0000 - 00000000077f3000 (ACPI NVS)
BIOS-e820: 00000000077f3000 - 0000000007800000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
119MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 30704
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 26608 pages, LIFO batch:6
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 AOPEN ) @
0x000f6390
ACPI: RSDT (v001 AOPEN AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x077f3000
ACPI: FADT (v001 AOPEN AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x077f3040
ACPI: DSDT (v001 AOPEN AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=/dev/hda3 rhgb quiet
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=02345000 soft=02344000
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 1102.787 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 118444k/122816k available (1540k kernel code, 3820k reserved,
599k data, 144k init, 0k highmem)
Calibrating delay loop... 2187.26 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security
failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000
00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1089967433.4294966708:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart: Maximum main memory to use for agp memory: 86M
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD400AB-00CDB0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
hdd: CR-48XGTE, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 54X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 203k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
Freeing unused kernel memory: 144k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 9, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 9, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
cdrom: open failed.
cdrom: open failed.
Adding 262040k swap on /dev/hda5. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.13 <tigran at veritas.com>
microcode: CPU0 already at revision 0x1 (current=0x1)
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
SCSI subsystem initialized
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux Tulip driver version 1.1.13 (May 11, 2002)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe800. Vers
LK1.1.19
divert: allocating divert_blk for eth0
eth0: Dropping NETIF_F_SG since no checksum feature.
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (959 buckets, 7672 max) - 296 bytes per
conntrack
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe800. Vers
LK1.1.19
divert: allocating divert_blk for eth0
eth0: Dropping NETIF_F_SG since no checksum feature.
eth0: Transmit error, Tx status register d0.
Flags; bus-master 1, dirty 1(1) current 1(1)
Transmit list 00000000 vs. 08aae2a0.
0: @08aae200 length 8000005a status 8000005a
1: @08aae2a0 length 00000000 status 00000000
2: @08aae340 length 00000000 status 00000000
3: @08aae3e0 length 00000000 status 00000000
4: @08aae480 length 00000000 status 00000000
5: @08aae520 length 00000000 status 00000000
6: @08aae5c0 length 00000000 status 00000000
7: @08aae660 length 00000000 status 00000000
8: @08aae700 length 00000000 status 00000000
9: @08aae7a0 length 00000000 status 00000000
10: @08aae840 length 00000000 status 00000000
11: @08aae8e0 length 00000000 status 00000000
12: @08aae980 length 00000000 status 00000000
13: @08aaea20 length 00000000 status 00000000
14: @08aaeac0 length 00000000 status 00000000
15: @08aaeb60 length 00000000 status 00000000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
eth0: Host error, FIFO diagnostic register 2000.
eth0: PCI bus error, bus status 00a00029
PCI: Setting latency timer of device 0000:00:07.5 to 64
[END dmesg]
[START lsmod]
Module Size Used by
nls_utf8 1536 1
nls_cp437 5376 1
vfat 10496 1
fat 33472 1 vfat
snd_mixer_oss 13824 2
snd_via82xx 19104 3
snd_pcm 68872 1 snd_via82xx
snd_timer 17156 1 snd_pcm
snd_ac97_codec 50436 1 snd_via82xx
snd_page_alloc 7940 2 snd_via82xx,snd_pcm
gameport 3328 1 snd_via82xx
snd_mpu401_uart 4864 1 snd_via82xx
snd_rawmidi 17184 1 snd_mpu401_uart
snd_seq_device 6152 1 snd_rawmidi
snd 38372 10
snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 6112 3 snd
parport_pc 19392 1
lp 8236 0
parport 29640 2 parport_pc,lp
autofs4 10624 0
sunrpc 101064 1
3c59x 30376 0
ipt_REJECT 4736 1
ipt_state 1536 7
ip_conntrack 24968 1 ipt_state
iptable_filter 2048 1
ip_tables 13440 3 ipt_REJECT,ipt_state,iptable_filter
floppy 47440 1
sg 27552 0
scsi_mod 91344 1 sg
microcode 4768 0
ext3 102376 1
jbd 40216 1 ext3
dm_mod 33184 0
uhci_hcd 23708 0
button 4504 0
battery 6924 0
asus_acpi 8472 0
ac 3340 0
ipv6 184288 8
reiserfs 187604 1
[END lsmod]
[START modprobe.conf]
alias eth0 3c59x
alias eth1 tulip
alias snd-card-0 snd-via82xx
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-via82xx
alias usb-controller uhci-hcd
[END modprobe.conf]
More information about the users
mailing list