SMP networking problem and 3D (libgl) not working [fedora core2]
Antonio Chay Hidalgo
antonio at chay.cl
Sat Jul 31 02:55:54 UTC 2004
Hello List, I have 2 problems:
I have a 2 cpus (pentium III, 800Mhz) machine, 2 ethernets cards and a
voodoo 5500 with fedora core 2. The mobo chipset is via apollo133A. The
network modules in use are: fealnx and 8139too. The machine is updated
with the fedora repositories.
Problem 1:
With the smp kernel (2.6.6-1.435.2.3smp), the network devices report
this errors:
NETDEV WATCHDOG: eth0: transmit timed out
Jul 29 20:37:47 roko kernel: eth0: Transmit timed out, status 0000003c,
resetting...
And the network doesn't work.
With the non-smp kernels (2.6.6-1.435.2.3), the network devices work
properly. This also happens with the original smp kernel.
---
Problem 2:
The 3D is not working, but xorg.conf seems to be properly configured.
The messages are like this:
gd error (glide): grSstSelect: non-existent SST
(and then seg. fault).
Any help would be apreciated.
[My xorg.conf file (comments cutted)]
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "ViewSonic E771-4"
DisplaySize 320 240
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "tdfx"
VendorName "Videocard vendor"
BoardName "Voodoo5 (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
--
Antonio Chay Hidalgo <antonio at chay.cl>
More information about the users
mailing list