Firewall & Routing - help!
Kevin F. Berrien
kblists at comcast.net
Thu Jun 10 16:07:59 UTC 2004
With the help of many on the previous thread (Firewall - Very limited
Access - suggestions), I've built my firewall using fwbuilder & FC1. At
present I've got it set up in a test environment. The firewall seems to
be operating correctly with one exception, but my real problem is with
my routing. I've always been terrible with routing.... At present, I
can't traverse from a workstation on the "internal" subnet to host on
"external" subnet, or internet.
I am not using NAT on this firewall, it just bridges two subnets -
allowing very specific traffic through (antivirus/windows-sus, remote
desktop). I need to get the routing between subnets working through the
firewall.
"external subnet" - eth0 - 192.168.50.0
gatway to internet - 192.168.50.1
eth0 ip 192.168.50.48/255.255.255.0 gw = 192.168.50.1
"internal subnet" - eth1 - 192.168.5.0
eth1 ip 192.168.5.200/255.255.255.0 gw = 192.168.50.1??
test host "internal"
ip 192.168.5.3/255.255.255.0 gw = 192.168.5.200??
Thanks!
Info from previous thread:
>I'm intersted in building a choke firewall for the following
sistuation. Have a closed network (police dept). There are no >crosses
to the internet. However, we'd like VERY LIMITED access by the Windows
DC server for the following: >Windows update (via SUS), Symantec AV
updates, VNC/or remote desktop connection to 1 or 2 admin workstations on
>our WAN.
More information about the users
mailing list