Hard Lock with Fedora Core 1
Small, Jim
jim.small at eds.com
Fri Mar 19 15:38:33 UTC 2004
I tried the sysreq=1 and nmi_watchdog=1 settings. I also hooked up a serial
cable to Com1. I even setup agetty to watch Com1 and logged in to make sure
that the connection is good.
However, when the system locks, alt-printscreen-p doesn't do anything and I
don't see any output on the serial port.
Am I doing something wrong? Is there anything else I can try?
<> Jim
> -----Original Message-----
> From: fedora-list-bounces at redhat.com [mailto:fedora-list-
> bounces at redhat.com] On Behalf Of Small, Jim
> Sent: Thursday, March 18, 2004 7:34 PM
> To: For users of Fedora Core releases
> Subject: RE: Hard Lock with Fedora Core 1
>
> Norman,
>
> Thank you for the configuration settings. I will try those tomorrow.
>
> Funny that BSD/OS ran for so long without hard locks. Since Linux is
> aggressive in using memory, I was thinking it could be a memory (RAM)
> issue.
> So I am running memtest86 3.1 overnight on the machine to grill the RAM.
> If
> there are no memory errors detected I'll try those settings tomorrow.
>
> I have a console cable. I'm assuming I just connect it to Com1 and watch?
> I'll try it tomorrow. I use console cables all the time for network
> devices
> and Suns, but not much for x86 boxes (which this is).
>
> On the one hand this is frustrating, but on the other, that's how you
> learn,
> right?!?
>
> Thanks again,
> <> Jim
>
> > -----Original Message-----
> > On Thu, Mar 18, 2004 at 06:53:38PM -0500, Small, Jim wrote:
> > > I've tried only using one NIC that doesn't share any IRQs (no bridging
> > or
> > > shared interrupts). Like I said, this box ran for months without
> > locking
> > > running BSD/OS. What could be causing it to hard lock?
> > >
> > > Is there some kernel option I can use to help debug the problem? Are
> > there
> > > any troublesome modules I should eliminate?
> >
> > You could try enabling the sysreq key. That is, in /etc/sysctl.conf,
> > set this:
> >
> > # Controls the System Request debugging functionality of the kernel
> > kernel.sysrq = 1
> >
> > then run "sysctl -p"
> >
> > Then, when the system hangs, on the console hit 'alt-prntscrn-P' to
> > see where the processors are locked. alt-prntscrn-H will show you other
> > commands you might want to try. A serial console is needed to collect
> > or view all the output.
> >
> > Setting NMI watchdog could also be helpful. Do that by putting
> > "nmi_watchdog=1" in the options of the kernel line in grub.conf.
> > The system should oops if it locks up.
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
More information about the users
mailing list