Raid-1 SCSI drive speed issue
Mike Tremaine
mgt at stellarcore.net
Wed May 5 00:52:40 UTC 2004
> >Problem:
> >
> >Target 0 Negotiation Settings
> > User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
> > Goal: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
> > Curr: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
> > Transmission Errors 0
> > Channel A Target 0 Lun 0 Settings
> > Commands Queued 134776253
> > Commands Active 2
> > Command Openings 30
> > Max Tagged Openings 32
> > Device Queue Frozen Count 0
> >Target 1 Negotiation Settings
> > User: 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
> > Goal: 10.869MB/s transfers (10.869MHz)
> > Curr: 10.869MB/s transfers (10.869MHz)
> > Transmission Errors 235
> > Channel A Target 1 Lun 0 Settings
> > Commands Queued 129918824
> > Commands Active 1
> > Command Openings 31
> > Max Tagged Openings 32
> > Device Queue Frozen Count 0
> >
> I'm pretty sure the negotiated settings are cleared when you do the scsi
> remove-single-device and renegotiated when you do the scsi
> add-single-device.
>
This is what I assumed also, the onyl thing that makes me wonder about
it is the counters have not been reset. Basically all the data in Target
1 is exactly what was there before I did the remove-single-device and
pulled the old drive.
> Perhaps you have a cable/connector problem?
That crossed my mind, but I really hope that is not it since it means
having to go on-site. ;).
--
Mike Tremaine
More information about the users
mailing list