camera revisited

[Gene Heskett]

Greetings all;

FC1 with a 2.6 kernel.

I've removed as much scsi stuff as I can and still run my tape drive, 
meaning I must have scsi tape support, and because its a changer, 
scsi_generic.

But when I plug in my camera on a usb port, and turn it on, this falls out of the logs:

May 14 00:34:40 coyote kernel: usb 3-2.2: new full speed USB device using address 91
May 14 00:34:40 coyote kernel: scsi23 : SCSI emulation for USB Mass Storage devices
May 14 00:34:41 coyote scsi.agent[18357]: how to add device type= at /devices/pci0000:00/0000:00:11.4/usb3/3-2/3-2.2/3-2.2:1.0/host23/23:0:0:0 ??
May 14 00:34:41 coyote kernel:   Vendor: OLYMPUS   Model: C-3020ZOOM(U)     Rev: 1.00
May 14 00:34:41 coyote kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
May 14 00:34:41 coyote kernel: Attached scsi generic sg2 at scsi23, channel 0, id 0, lun 0,  type 0

Whats this scsi.agent thingy anyhoo?

Previously, the module usb_storage, built into the kernel, seemed to 
handle it well enough that I could at least "mount -t 
vfat /dev/sda1 /mnt/camera" and download the pix (provided I deleted 
them from the camera in the reverse order of their being taken that 
is)

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.22% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.