Work around for bug 121819 - P4P800 series mobos

raxet maxer1 at xmission.com
Fri May 21 13:27:25 UTC 2004


FROM Owen Taylor COMMENT #67 on bug 121819:

Here's a method I got from Jeremy Katz to workaround this problem.
(This is from memory, so some of the paths are approximate, if
someone tries this, they may want to write down the exact paths
as they go and correct me)

 1. Once the CD is mounted (I think this is at the first graphical
    screen, but you may have to go a few further), switch back
    to VT running a shell. (One of Control-Alt-F1/F2/etc.)

 2. Change into the RPMS directory on the mounted CD

    # cd /mnt/sources/Fedora/RPMS/

 3. Uncompress the kernel-smp package into /tmp.

    # rpm2cpio kernel-smp-2.6.5-1.358.i68.rpm | (cd /tmp && cpio -id)

 4. Go into the modules directory:

    # cd /tmp/lib/modules/2.6.5-1.358smp/kernel

 5. Install the modules you need, e.g.

    # insmod fs/jbd/jbd.ko       [ Journalling Block Device, needed by
ext3 ]
    # insmod fs/ext3/ext3.ko
    # insmod drivers/md/xor.ko   [ XOR, needed by RAID5 ]
    # insmod drivers/md/raid0.ko
    # insmod drivers/md/raid1.ko
    # insmod drivers/md/raid5.ko

  (You probably don't need all those RAID drivers, there might
   be others you need if you are doing something unusual.)

 6. Do an lsmod to make sure that the modules actually got loaded
    (the insmod command is a stripped down version without
     error reporting)

 7. Switch back to the VT with the X server and continue the install.





More information about the users mailing list