can't get ip through dhcp after upgrade
Kevin Old
kevinold at gmail.com
Wed Nov 10 15:10:16 UTC 2004
On Wed, 10 Nov 2004 14:52:11 +0100 (CET), Roger Grosswiler
<roger at gwch.net> wrote:
>
> if you execute /sbin/iptables -L, will you see 3 empty iptables-chains with no rules inside? If no, probably your
> firewall hasn't properly stopped. If you want to stop firewalling completely, i always use /sbin/service iptables stop
Just to be safe, I did /sbin/service iptables stop, it reported that
it was already stopped. The output of /sbin/iptables -L is here
http://www.perlconsultant.net/fc3/iptables.txt
> also, if you do /sbin/ifconfig, do you just get lo? or even eth0? what ip-adresses can you see? Just 127.0.0.1?
/sbin/ifconfig just produces lo, unless I configure
/etc/sysconfig/network-script/ifcfg-eth0 with information for a static
IP, then that static IP shows up as eth0 when doing a /sbin/ifconfig,
but even though it shows up, I'm not able to do anything on any port.
> also, do 'locate dhclient' - do you find those files:
>
> /var/lib/dhcp/dhclient-eth0.leases
I do find these files, but there is nothing in them. The files I find are:
/var/lib/dhcp/dhclient-eth0.leases
/var/lib/dhcp/dhclient.leases
/var/lib/dhcp/dhcpd.leases
> /etc/dhclient-eth0.conf
I do not have this file.
> this makes your hostname known to your dhcp/dns-servers.
> if you don't have a leases-file: try again to start dhclient and look in /var/log/messages, you should get some
> entries there
I've put the output of running /sbin/dhclient at
http://www.perlconsultant.net/fc3/dhclient.txt
I've put /var/log/messages and /var/log/dmesg at
http://www.perlconsultant.net/fc3/messages.txt
http://www.perlconsultant.net/fc3/dmesg.txt
Any help is greatly appreciated!
Kevin
--
Kevin Old
kevinold at gmail.com
More information about the users
mailing list