AVM Fritz Card and capi
Ian Clough
ianhome at intech.co.uk
Sat Oct 16 09:28:49 UTC 2004
Thanks for helping again Alexander
>Am Fr, den 15.10.2004 schrieb Ian Clough um 8:52:
>> I am on FC2 and have upgraded to 2.6.8 - 521
> >
>> I am trying to get my passive ISDN card - AVM Fritz working with my
>> application - Asterisk.
> >
>> After some help from Alexander D. I changed /etc/sysconfig/isdncard
>> The line
>> MODULE=hisax
>> is changed to:
>> MODULE='hisax_fcpcipnp'
>> my card now appears to function although it starts two times
>> In the log on boot up I see:-
>> Oct 15 07:12:36 vigor11 kernel: ISDN subsystem Rev:
>> 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
>> Oct 15 07:12:36 vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card
>> PCI
>> v2 at 0000:02:05.0
>> Oct 15 07:12:36 vigor11 kernel: HiSax module removed
>> Oct 15 07:12:36 vigor11 kernel: ISDN-subsystem unloaded
>ISDN is stopped here. You have to find out what is causing this
>behaviour.
OK the isdn service was starting, being unloaded and then starting again.
I eventually moved S09kudzu from /etc/rc5.d (temporarily) and the service
now only starts once:-
(I guess I have something wrong with kudzu)
Oct 16 10:02:25 vigor11 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct 16 10:02:25 vigor11 kernel: ip_conntrack version 2.1 (956 buckets, 7648
max) - 320 bytes per conntrack
Oct 16 10:02:25 vigor11 kernel: CSLIP: code copyright 1989 Regents of the
University of California
Oct 16 10:02:25 vigor11 kernel: ISDN subsystem Rev:
1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 16 10:02:25 vigor11 kernel: HiSax: Linux Driver for passive ISDN cards
Oct 16 10:02:25 vigor11 kernel: HiSax: Version 3.5 (module)
Oct 16 10:02:25 vigor11 kernel: HiSax: Layer1 Revision 2.46.2.5
Oct 16 10:02:25 vigor11 kernel: HiSax: Layer2 Revision 2.30.2.4
Oct 16 10:02:25 vigor11 kernel: HiSax: TeiMgr Revision 2.20.2.3
Oct 16 10:02:25 vigor11 kernel: HiSax: Layer3 Revision 2.22.2.3
Oct 16 10:02:25 vigor11 kernel: HiSax: LinkLayer Revision 2.59.2.4
Oct 16 10:02:25 vigor11 kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver
v0.1.0
Oct 16 10:02:25 vigor11 kernel: hisax_fcpcipnp: Unknown parameter `type'
Oct 16 10:02:25 vigor11 kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP
ISDN driver v0.0.1
Oct 16 10:02:25 vigor11 kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0
(0)
Oct 16 10:02:25 vigor11 kernel: HiSax: DSS1 Rev. 2.32.2.3
Oct 16 10:02:25 vigor11 kernel: HiSax: 2 channels added
Oct 16 10:02:25 vigor11 kernel: HiSax: MAX_WAITING_CALLS added
Oct 16 10:02:25 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5
(level, low) -> IRQ 5
Oct 16 10:02:25 vigor11 kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI
v2 at 0000:02:05.0
Oct 16 10:02:26 vigor11 kernel: Zapata Telephony Interface Registered on
major 196
Oct 16 10:02:26 vigor11 kernel: Registered tone zone 0 (United States /
North America)
Oct 16 10:02:26 vigor11 kernel: ACPI: PCI interrupt 0000:02:09.0[A] -> GSI
11 (level, low) -> IRQ 11
Oct 16 10:02:26 vigor11 kernel: 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
Oct 16 10:02:26 vigor11 kernel: 0000:02:09.0: 3Com PCI 3c905C Tornado at
0x3400. Vers LK1.1.19
However I still do not have capi:-
[root at Vigor11 log]# capiinfo
capi not installed - No such device or address (6)
[root at Vigor11 log]# capiinit
ERROR: cannot load module kernelcapi
[root at Vigor11 log]# modprobe kernelcapi
[root at Vigor11 log]# modprobe capi
[root at Vigor11 log]# capiinit
ERROR: cannot load module kernelcapi
I have tried a few complete new installs of FC2 so I do not think it is
caused by something that I have done :-)
Any ideas??
Thanks again
Ian
More information about the users
mailing list