aic7xx system hangs
jlconlin at umich.edu
Fri Sep 10 18:02:58 UTC 2004
I just checked the speed(s). The SCSI adapter that has the hard
drives/RAID, all the devices are set to 80. The other SCSI adapter
that controls the CD-ROM and tape drive has all the devices set to 20.
Do they need to both be the same speed?
On Sep 10, 2004, at 1:12 PM, Hans Müller wrote:
> C. Linus Hicks schrieb:
>> On Thu, 2004-09-09 at 14:27, Jeremy Conlin wrote:
>>> I recently installed Fedora Core 2 on a Dell PowerEdge 2400 server
>>> that previously ran Red Hat 9. The installation appears to proceed
>>> normally. The problem is it never boots entirely. It hangs with
>>> the following as the last message (after removing quiet mode):
>>> Loading sd_mod.ko module
>>> Loading aic7xxx.ko module
>> Are you saying the installer is hanging, or that the install completed
>> but now it won't boot the installed kernel?
> try to reduce the spedd of the diveces in the controller bios. I have
> the same problem with a tape drive. After set the speed from 160 to
> 80. it works.
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
More information about the users