How to get cdrecord working in FC2?

[Pybe]

On Tue, 28 Sep 2004 09:26:19 -0500, Randy Kelsoe <randykel at swbell.net> wrote:
> 
> First, look at your /etc/grub.conf entry for your present kernel, and
> make sure you don't have have an 'ide-scsi' entry for your burner.
> 
> What I did to get my burner working (it's also /dev/hdd), was to edit my
> /etc/cdrecord.conf file. Here are the uncommented lines from my
> cdrecord.conf:
> 
>         CDR_DEVICE=PLEXTOR
>         CDR_FIFOSIZE=4m
>         PLEXTOR=        ATA:1,1,0       -1      -1      burnfree
> 
> You can call your burner anything you want, just substitute PLEXTOR
> above for whatever you want to call your drive. Once you get your
> cdrecord.conf file edited:
> 
> cdrecord -v yourfilename.iso
> 
> will burn an iso image.
> 

This still results in the same hang. 

Thanks
Pybe