FC3: ide tape problem with kernel 2.6.10 [SOLVED]
Craig Goodyear
craig48 at swbell.net
Fri Apr 8 14:56:36 UTC 2005
>> I am using a Seagate STT8000A ATAPI tape drive for backup. Prior to
>> the kernel update to 2.6.10, tar and dump both worked without any
>> problems using this tape drive.
>>
>> Since the kernel update, tar and dump appear to write the files to the
>> tape drive: no error messages are generated during the write.
>> However, I am not able to restore any of the backup files to the hard
>> disk.
>>
>
> I have found that I can get the tape drive to work if DMA is turned off.
> The tape is setup as hdd during the boot process. However, there
> is no entry created in /dev for hdd. The only way that I know to
> disable DMA is for all IDE drives, using ide=nodma. Since /dev/hdd is
> missing, I cannot figure out a way to use hdparm.
>
> Is there a way to turn off the DMA for only the tape drive?
>
Thanks to those who responded to my requests for help.
Craig
More information about the users
mailing list