USB MASS STORAGE not found
BZ Benny
bennybbz at yahoo.fr
Thu Apr 21 13:25:17 UTC 2005
Hi all i already installed FC and my hard disk with
usb connection was recognized by fedora. I reinstall
FC in the same PC but my hrsd dis was not recognized.
dmesg tell me tath:
Linux version 2.6.11-1.14_FC3
(bhcompile at bugs.build.redhat.com) (gcc version 3.4.3
20050227 (Red Hat 3.4.3-22)) #1 Thu Apr 7 19:23:49 EDT
2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000
(usable)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 0000000017df7000
(usable)
BIOS-e820: 0000000017df7000 - 0000000017e16000 (ACPI
data)
BIOS-e820: 0000000017e16000 - 0000000018000000
(reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000
(reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000
(reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000
(reserved)
0MB HIGHMEM available.
381MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 97783
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 93687 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL
) @ 0x000fd6d0
ACPI: RSDT (v001 DELL GX150 0x00000005 ASL
0x00000061) @ 0x000fd6e4
ACPI: FADT (v001 DELL GX150 0x00000005 ASL
0x00000061) @ 0x000fd718
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT
0x0100000d) @ 0xfffe74bc
ACPI: BOOT (v001 DELL GX150 0x00000005 ASL
0x00000061) @ 0x000fd7e8
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT
0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 18000000 (gap:
18000000:e6c00000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00
rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c0447000 soft=c0446000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 931.483 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)
Inode-cache hash table entries: 32768 (order: 5,
131072 bytes)
Memory: 382316k/391132k available (2457k kernel code,
8172k reserved, 687k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay loop... 1847.29 BogoMIPS
(lpj=923648)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary
module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096
bytes)
CPU: After generic identify, caps: 0383f9ff 00000000
00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000
00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f1ff 00000000 00000000
00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e00)
checking if image is initramfs... it is
Freeing initrd memory: 961k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last
bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10
11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10
11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10
*11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10
*11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10
11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10
11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10
11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10
*11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.
If this
** causes a device to stop working, it is probably
because the
** driver failed to call pci_enable_device(). As a
temporary
** workaround, the "pci=routeirq" argument restores
the old
** behavior. If this argument makes the device work
again,
** please email the output of "lspci" to
bjorn.helgaas at hp.com
** so I can fix the driver.
pnp: 00:0b: ioport range 0x800-0x85f could not be
reserved
pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved
pnp: 00:0b: ioport range 0x860-0x8ff could not be
reserved
Simple Boot Flag at 0x7d set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version
1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1114096464.058:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key D3D8ABEBF02BB2BE
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: Maximum main memory to use for agp memory:
319M
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized drm 1.0.0 20040925
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports,
IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K
size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings:
hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB
Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5,
131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752
bytes)
TCP: Hash tables configured (established 16384 bind
16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
VBTN PCI0 USB0 USB1 PCI1 KBD
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 180k freed
device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 320 types, 23 bools
security: 53 classes, 10952 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not
configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs),
not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
SELinux: initialized (dev eventpollfs, type
eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses
task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses
task SIDs
SELinux: initialized (dev proc, type proc), uses
genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses
genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses
genfs_contexts
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 11 (level,
low) -> IRQ 11
3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
0000:01:0c.0: 3Com PCI 3c905C Tornado at 0xec80. Vers
LK1.1.19
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to
64
intel8x0_measure_ac97_clock: measured 49977 usecs
intel8x0: clocking to 41153
i801_smbus 0000:00:1f.3: enabling SMBus device
hw_random: RNG not detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level,
low) -> IRQ 11
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to
64
uhci_hcd 0000:00:1f.2: irq 11, io base 0xff80
uhci_hcd 0000:00:1f.2: new USB bus registered,
assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level,
low) -> IRQ 11
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to
64
uhci_hcd 0000:00:1f.4: irq 11, io base 0xff60
uhci_hcd 0000:00:1f.4: new USB bus registered,
assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and
address 2
usb 2-2: new full speed USB device using uhci_hcd and
address 2
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SELinux: initialized (dev ramfs, type ramfs), uses
genfs_contexts
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager
initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before
scanning
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03d7840(lo)
IPv6 over IPv4 tunneling driver
Vendor: HDS72251 Model: 6VLAT20 Rev: 0 0
Type: Direct-Access ANSI SCSI
revision: 00
usb-storage: device scan complete
SCSI device sda: 321672960 512-byte hdwr sectors
(164697 MB)
sda: assuming drive cache: write through
SCSI device sda: 321672960 512-byte hdwr sectors
(164697 MB)
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun
0
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
EXT3 FS on dm-0, internal journal
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
Adding 786424k swap on /dev/VolGroup00/LogVol01.
Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type
binfmt_misc), uses genfs_contexts
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE,EPP]
pnp: Device 00:0a disabled.
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 11 (level,
low) -> IRQ 11
SELinux: initialized (dev rpc_pipefs, type
rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
pnp: Device 00:0a activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level,
low) -> IRQ 9
[drm] Initialized i810 1.4.0 20030605 on minor 0:
[drm:drm_unlock] *ERROR* Process 4268 using kernel
context 0
usb 2-2: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and
address 3
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before
scanning
Vendor: HDS72251 Model: 6VLAT20 Rev: 0 0
Type: Direct-Access ANSI SCSI
revision: 00
SCSI device sda: 321672960 512-byte hdwr sectors
(164697 MB)
sda: assuming drive cache: write through
SCSI device sda: 321672960 512-byte hdwr sectors
(164697 MB)
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 >
Attached scsi disk sda at scsi1, channel 0, id 0, lun
0
usb-storage: device scan complete
Tanks for the help
regards,
Benny
__________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
More information about the users
mailing list