ethernet not working (FC4)
Jerry Kazdan
jerry.kazdan at gmail.com
Thu Aug 25 15:01:16 UTC 2005
The tail of /var/lib/dhcp/dhclient-eth0.lease is below (the earlier
parts are similar but with an earlier expiration time).
Hope this helps resolve the problem.
-- Jerry
/lease {
interface "eth0";
fixed-address 157.181.227.44;
filename "pxelinux.0";
option subnet-mask 255.255.254.0;
option routers 157.181.227.254;
option dhcp-lease-time 3600;
option dhcp-message-type 5;
option domain-name-servers 157.181.226.4,157.181.226.5;
option dhcp-server-identifier 157.181.226.3;
option ntp-servers 157.181.226.3;
option broadcast-address 157.181.227.255;
option host-name "dhcp44.cs.elte.hu";
option domain-name "cs.elte.hu";
renew 4 2005/8/25 15:14:19;
rebind 4 2005/8/25 15:42:46;
expire 4 2005/8/25 15:50:16;
}
On 8/25/05, Paul Howarth <paul at city-fan.org> wrote:
> Jerry Kazdan wrote:
> > I just updated my laptop from Fedora Core 3 (kernel 2.6.9-1.667)
> > to Fedora Core 4 (kernel: 2.6.11-1.1369_FC4)
> > Now eth0 (ethernet) does not correctly work, although it did work with
> FC3.
> > I am using a DHCP connection at this university with everything assigned
> > automatically.
> > ==> On this laptop etho (ethernet) the identical connection works
> > perfectly with Knoppix 3.9 which uses kernel 2.6.11, so I know it is
> > not the hardware nor the DHCP server nor routers along the way.
> >
> > Here are some details:
> >
> > 1. When I first booted to the new FC4, there was no ethernet. The boot
> > screen said [eth0 failed] (although from dmesg it recognized the
> > ethernet card). I had the identical problem earlier with the following
> FC3
> > update kernels:
> > 2.6.12-1.1372_FC3
> > 2.6.11-1.35_FC3
> > 2.6.11-1.27_FC3
> > which is why I reverted to the older kernel 2.6.9-1.667, which did work.
>
> > Note that eth0 works perfectly with Knoppix 3.9; it uses kernel 2.6.11.
> >
> > 2. Then I changed grub.conf, adding "acpi=ht" so the line reads:
> > kernel /vmlinuz-2.6.11-1.1369_FC4 ro root=LABEL=/1 vga=773 acpi=ht
> >
> > This helped a bit since now I DHCP _does work_ and I can connect to
> > the local sub-net, but NOT elsewhere. The problem is not the
> > nameserver since if I use the numerical IP address I get the same
> > error, as the following test shows:
> > > ssh 130.91.49.156
> > ssh: connect to host 130.91.49.156 port 22: Network is unreachable
> >
> > 3. When I use the Fedora menu item "Network" and look under "hosts",
> > it does not seem to be using my /etc/hosts file since my copy has a few
> > additional items (see below).
> >
> > 4. I changed gnome.conf to turn-off acpi and disable SELinus (so
> > "acpi=off selinux=0") and rebooted but that did not help.
> >
> > Any suggestions?
> > Jerry
> >
> >
> > See below for more data, particularly from dmesg, ifconfig and netstat.
> >
> > My Hardware: Dell Inspiron 9300 (laptop). See dmesg just below for the
> > ethernet card -- which as you can see this FC4 kernel does recognize.
> >
> > I am NOT using the service "NetworkManager".
> >
> > Here are items from dmesg (some of which may be irrelevant), ifconfig,
> > and netstat:
> >
> > -------------------- snips from dmesg
> ----------------------------------
> > eth0: Broadcom 4400 10/100BaseT Ethernet 00:11:43:77:ae:ab
> > ieee80211_crypt: registered algorithm 'NULL'
> > ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.0
> > ipw2200: Copyright(c) 2003-2004 Intel Corporation
> >
> > b44: eth0: Link is down.
> > codec_semaphore: semaphore is not ready [0x1][0x700300]
> > codec_write 1: semaphore is not ready for register 0x54
> > codec_semaphore: semaphore is not ready [0x1][0x700300]
> > b44: eth0: Link is up at 10 Mbps, half duplex.
> > b44: eth0: Flow control is off for TX and off for RX.
> >
> > eth0: no IPv6 routers present
> > -----------------------------------------------------
> >
> >>netstat -rn
> >
> > Kernel IP routing table
> > Destination Gateway Genmask Flags MSS Window irtt
> Iface
> > 157.181.226.0 0.0.0.0 255.255.254.0 U 0 0 0
> eth0
> > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
> eth0
>
> You don't have a default route, This should normally come from dhcp.
>
> What's in /var/lib/dhcp/dhclient-eth0.leases?
>
> Paul.
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
More information about the users
mailing list