Two audigy problems

[david walcroft]

flp wrote:
> david walcroft wrote:
> 
>> I have just bought an Audigy Value card,the problems are:-
>>
>> 1/ What programme reads a Creative extention ".chm"
> 
> 
> I don't think that's a Creative extension, it is probably:
> 
> HTML Help Compiled Help File (Microsoft).
> 
>>
>> 2/ Sound is nothing but static between the first 2 notes and the last 2
>> notes of any sound sequence.
>>
>> Any ideas on these.
>>
>> Part lsmod
>>
>> snd_ca0106             29797  0
>> snd_ac97_codec         88893  1 snd_ca0106
>> snd_seq_dummy           3781  0
>> snd_seq_oss            31937  0
>> snd_seq_midi_event      7105  1 snd_seq_oss
>> snd_seq                49873  5 
>> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>> snd_seq_device          9165  3 snd_seq_dummy,snd_seq_oss,snd_seq
>> snd_pcm_oss            51057  0
>> snd_mixer_oss          18113  1 snd_pcm_oss
>> snd_pcm                87749  3 snd_ca0106,snd_ac97_codec,snd_pcm_oss
>> snd_timer              25285  2 snd_seq,snd_pcm
>> snd                    54949  9
>> snd_ca0106,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer 
>>
>> soundcore               9889  1 snd
>> snd_ac97_bus            2497  1 snd_ac97_codec
>> snd_page_alloc         10825  2 snd_ca0106,snd_pcm
>>
> 
> It doesn't look like you have the Creative stuff loaded from the above, 
> it probably should look more like:
> 
> snd_emu10k1_synth       8513  0
> snd_emux_synth         42561  1 snd_emu10k1_synth
> snd_seq_virmidi         7105  1 snd_emux_synth
> snd_seq_midi_event      9281  1 snd_seq_virmidi
> snd_seq_midi_emul       7233  1 snd_emux_synth
> snd_seq                61777  4 
> snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul
> snd_emu10k1           128965  3 snd_emu10k1_synth
> snd_rawmidi            29664  2 snd_seq_virmidi,snd_emu10k1
> snd_seq_device          8653  5 
> snd_emu10k1_synth,snd_emux_synth,snd_seq,snd_emu10k1,snd_rawmidi
> snd_ac97_codec         74937  1 snd_emu10k1
> snd_pcm_oss            50673  0
> snd_mixer_oss          17729  2 snd_pcm_oss
> snd_pcm                98889  3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
> snd_timer              32837  3 snd_seq,snd_emu10k1,snd_pcm
> snd_page_alloc          9669  2 snd_emu10k1,snd_pcm
> snd_util_mem            4673  2 snd_emux_synth,snd_emu10k1
> snd_hwdep               8929  2 snd_emux_synth,snd_emu10k1
> snd                    57285  14 
> snd_emux_synth,snd_seq_virmidi,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep 
> 
> soundcore              10785  2 snd
> 
> =========================================================
> 
>> modprobe.conf
>>
>> alias eth0 tulip
>> alias eth1 tulip
>> # options snd-via82xx index=0
>> # remove snd-via82xx { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
>> }; /sbin/modprobe -r --ignore-remove snd-via82xx
>> alias usb-controller ehci-hcd
>> alias usb-controller1 uhci-hcd
>> alias net-pf-10 off
>> install ipv6 /bin/true
>> options loop max-loop=32
>> # I2C module options
>> alias char-major-89 i2c-dev
>> options snd cards_limit=1
>> alias snd-card-0 snd-ca0106
>> options snd-card-0 index=0
>> options snd-ca0106 index=0
>> remove snd-ca0106 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; };
>>  /sbin/modprobe -r --ignore-remove snd-ca0106
> 
> 
> Also in my modprobe.conf I have the following rather than what you have:
> 
> remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; 
> /sbin/modprobe -r --ignore-remove snd-emu10k1
> alias snd-card-0 snd-emu10k1
> options snd-card-0 index=0
> 
> (the first two lines are all on ONE line in the file)
> 
> I am running FC3 and did nothing more than allow the system to configure 
> it once   I rebooted after installed my Audigy card.  I don't have the 
> 'value' model, I don't recall which one I do have.   From what you have 
> listed it looks like the system is still seeing the old (onboard?) 
> settings.  Did you turn them off in the BIOS after installing the Audigy?
> 
> ciao,
> furlan
> 
> 
flp,
   You would recommend I "rmmod snd_ca0106 " then "modprobe snd_emu" but 
how to make it permanent through reboots?

   thanks  david