FC2 - CD Drive installation or Cdrecord setup Problem
David Curry
dsccable at comcast.net
Fri Jan 28 07:52:32 UTC 2005
Help please. CDrom and CD-RW drives read just fine. Unable to burn
cds with CD-RW.
Using FC2 kernel 2.6.10-1.9 on AMD cpu system
fstab is
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/hda3 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom udf,iso9660
noauto,user,kudzu,rw 0 0
/dev/cdrom1 /mnt/cdrom1 udf,iso9660
noauto,user,kudzu,ro 0 0
/dev/fd0 /mnt/floppy auto
noauto,user,kudzu 0 0
NOTE: Nautilus sees the CD devices as CD-ROM and CD-ROM2.
-----------------------------------------------------------------------------------------------
cdrecord.conf is
#ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling
#
# This file is /etc/cdrecord.conf
# It contains defaults that are used if no command line option
# or environment is present.
#
# The default device, if not specified elswhere
#
CDR_DEVICE=cdrom
cdrom=1,0,0 -1 -1 burnfree
Note: Specification of cdrom=0,0,0 or cdrom=1,0,0 per scanbus output
produces the same result.
I have also tried cdrom=ATAPI:0,0,0 per google search findings.
---------------------------------------------------------------------------------------------
cdrecord -scanbus gives
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83
04/05/20 Copyright 1997 J. Schilling').
cdrecord: Warning: controller returns wrong size for CD capabilities page.
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
Using libscg version 'schily-0.8'.
scsibus1:
1,0,0 100) 'ATAPI ' 'CD-R/RW 24X10 ' 'P.MJ' Removable CD-ROM
1,1,0 101) 'LITEON ' 'CD-ROM LTN301 ' 'MM07' Removable CD-ROM
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
-------------------------------------------------------------------------------------------
K3b-debug output is
System
-----------------------
K3b Version:0.11.14
KDE Version: 3.2.2-12.FC2 Red Hat
QT Version: 3.3.3
cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code
version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'ATAPI '
Identifikation : 'CD-R/RW 24X10 '
Revision : 'P.MJ'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R
Drive buf size : 1630208 = 1592 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 63 MB
Total size: 72 MB (07:13.28) = 32496 sectors
Lout start: 73 MB (07:15/21) = 32496 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 336075 (74:43/00)
1T speed low: 4 1T speed high: 10
power mult factor: 2 6
recommended erase/write power: 5
A1 values: 24 2C DC
A2 values: 00 00 00
A3 values: 00 00 00
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 303579
Speed set to 1760 KB/s
Starting to write CD/DVD at speed 10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: CUE sheet not accepted. Retrying with minimum
pregapsize = 1.
/usr/bin/cdrecord: Success. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 32
cmd finished after 0.010s timeout 200s
/usr/bin/cdrecord: CUE sheet still not accepted. Please try to write in
RAW (-raw96r) mode.
/usr/bin/cdrecord: Cannot send CUE sheet.
/usr/bin/cdrecord: Could not write Lead-in.
Writing time: 2.367s
/usr/bin/cdrecord: fifo had 64 puts and 0 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was
100%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=10 -dao
driveropts=burnfree -eject -xa1 /tmp/kde-root/k3b_0.iso
More information about the users
mailing list