Is the HP PSC 1315 not recognized by FC4?
Vinicius
cviniciusm at terra.com.br
Mon Jul 11 16:05:04 UTC 2005
Vinicius escreveu:
> William Case escreveu:
>
>> On Mon, 2005-07-11 at 10:21 -0400, fedora-list-request at redhat.com wrote:
>>
>>> Message: 13
>>> Date: Mon, 11 Jul 2005 10:43:47 -0300
>>> From: Vinicius <cviniciusm at terra.com.br>
>>> Subject: Re: Is the HP PSC 1315 not recognized by FC4?
>>
>>
>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> I have a HP PSC 1315 and the computer OS is FC4 (the kernel is
>>>>>>>> 2.6.12-1.1387_FC4).
>>>>>>>
>>>>>>>
>> [snip]
>>
>>> Vinicius.
>>
>>
>>
>> I have exactly the same printer setup (with USB). HP PSC 1315 installed
>> without a problem. Kudzu asked for the driver and I gave it psc 1300
>> series rather than HP PSC 1315 (which doesn't exist). The correct psc
>> 1300 series driver was included in the .ISO download disks. Try using
>> this before messing up your install setup or adding additional drivers.
>> If it doesn't work it has to be a problem with your USB.
>>
>> Regards Bill
>
>
> Hello,
>
> 1. on FC3, the printer was working fine, using the default HPIJS driver
> by Red Hat and/or the HPLIP driver;
> 2. I did do a fresh install of FC4, without any change on my hardware;
> 3. the issues started on FC4.
>
> Did you do a fresh installation of FC4, please?
>
> After the tip by Kam Leo, the command lsusb is showing the printer as
> can see by the message that was sent by me, but there is something
> strange, because each restart of the computer, lsusb is not showing the
> printer, I can see the printer information after I turn off and then
> turn on the printer. In the past, I never had this problem before.
>
>
> Regards,
>
> Vinicius.
>
I don't thing that Red Hat is the culprit. By the way, I think there
isn't a culprit, but I think there is something strange happening.
Best regards,
Vinicius.
More information about the users
mailing list