The HP PSC 1315 is recognized by FC4, print but no scan yet.

[Vinicius]

Vinicius wrote:
> Vinicius wrote:
> 
>> Vinicius wrote:
>>
>>> Hello,
>>>
>>> I have a HP PSC 1315 and the computer OS is FC4 (the kernel is
>>> 2.6.12-1.1387_FC4).
>>>
>>> The command lspci is not showing the printer, but it did show on FC3
>>> and the printer was working on FC3.
>>>
>>> Any ideias, please?
>>>
>>>
>>> TIA,
>>>
>>> Vinicius.
>>>
>>
>> Finally, after the kernel "kernel-2.6.12-1.1398_FC4" installed, I was
>> able to install the printer. Now the command 'lsusb' detects the printer.
>>
>>
>> Thanks,
>>
>> Vinicius.
>>
>>
>> P.S.: As suggested by Dave Jones I did do backups of modprobe.conf and
>> hwconf, but kudzu wasn't able to detect all my hardware even after a
>> reboot. So, I had to restore modprobe.conf .
>>
> 
> Well, I can print with success but scan not.
> 
> I think it's something related to SELinux and some python programs by
> HPLIP.
> 
> See the following:
> "# ./info -pPSC1315
> 
>  HP Linux Imaging and Printing System (ver. 0.9.3)
>  Device Information Utility ver. 2.8
> 
>  Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
>  This software comes with ABSOLUTELY NO WARRANTY.
>  This is free software, and you are welcome to distribute it
>  under certain conditions. See COPYING file for more details.
> 
> 
> Info for: hp:/usb/psc_1310_series_?serial=XXXXXXXXXXXX
> 
>    Info                Value(s)
>    ------------------
> ----------------------------------------------------------
>    Device URI:         hp:/usb/psc_1310_series_?serial=XXXXXXXXXXXX
>    Model name:         psc 1310 series
>    Serial no.:         XXXXXXXXXXXX
>    CUPS back end:      hp
>    Device file:        hp:/usb/psc_1310_series_?device=/dev/usb/lp0
>    I/O bus:            usb
>  [ERROR]: Unable to contact services daemon. Exiting.
> 
> # ./toolbox
> toolbox
> toolbox HP Linux Imaging and Printing System (ver. 0.9.3)
> toolbox HP Device Manager ver. 4.0
> toolbox
> toolbox Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> toolbox This software comes with ABSOLUTELY NO WARRANTY.
> toolbox This is free software, and you are welcome to distribute it
> toolbox under certain conditions. See COPYING file for more details.
> toolbox
> toolbox Listening on localhost port 32789
> Traceback (most recent call last):
>   File "./toolbox", line 411, in ?
>     sys.exit( main( sys.argv[1:] ) )
>   File "./toolbox", line 330, in main
>     toolbox = devmgr4( toolboxCleanup )
>   File "/usr/share/hplip/ui/devmgr4.py", line 249, in __init__
>     self.service = service.Service()
>   File "/usr/share/hplip/base/service.py", line 51, in __init__
>     raise Error( ERROR_UNABLE_TO_CONTACT_SERVICE )
> base.g.Error: ('Unable to contact service', 96)
> 
> # ausearch -sv no
> ...
> time->Fri Jul 15 20:36:47 2005
> type=SOCKETCALL msg=audit(1121470607.263:39769): nargs=3 a0=5
> a1=b7d04b60 a2=10
> type=SOCKADDR msg=audit(1121470607.263:39769):
> saddr=020080027F0000010000000000000000
> type=SYSCALL msg=audit(1121470607.263:39769): arch=40000003 syscall=102
> success=no exit=-13 a0=3 a1=bfdd5e30 a2=4c3114 a3=b7d04b48 items=0
> pid=2240 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0
> fsgid=0 comm="python" exe="/usr/bin/python"
> type=AVC msg=audit(1121470607.263:39769): avc:  denied  { name_connect }
> for  pid=2240 comm="python" dest=32770
> scontext=system_u:system_r:hplip_t tcontext=system_u:object_r:port_t
> tclass=tcp_socket
> ..."
> 
> Any suggestions, please?
> 

Hello,

after the recent FC4 updates such as gcc and libtool (thanks to them, I
think), hplip 0.9.4 from http://sourceforge.net/projects/hpinkjet/ is
working fine with FC4, printing e scanning. I think the hplip component
from the Fedora development team will work too. But I'm running with
SELinux disabled, so I will turn it on and to see what happens.


Cheers,

Vinicius.