help adding a sata drive to the system

[John Stile]

I am new to Fedora Core, and have a Fedora Core 2 system running on one
sata drive.  I added one additional sata drive but dmesg below says,
'ata2: SATA port has no device'. 

Is there a Fedora Core utility program or something?

The current sata drive appears as /dev/sda.  It looks like partitions on
sda appear in a file called  /etc/blkid.tab.  What program created that?

Thank you.
---------------------
dmesg secion shows: 
----------------------		
	SCSI subsystem initialized
	libata version 1.02 loaded.
	ata_piix version 1.02
	PCI: Setting latency timer of device 0000:00:1f.2 to 64
	ata1: SATA max UDMA/133 cmd 0xE900 ctl 0xEA02 bmdma 0xED00 irq 193
	ata2: SATA max UDMA/133 cmd 0xEB00 ctl 0xEC02 bmdma 0xED08 irq 193
	ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023
88:203f
	ata1: dev 0 ATA, max UDMA/100, 160836480 sectors (lba48)
	ata1: dev 0 configured for UDMA/100
	scsi0 : ata_piix
	ata2: SATA port has no device.
	ata2: thread exiting
	scsi1 : ata_piix
	Using cfq io scheduler
	  Vendor: ATA       Model: HDS722580VLSA80   Rev: 1.02
	  Type:   Direct-Access                      ANSI SCSI revision: 05
	SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
	SCSI device sda: drive cache: write through
	 sda: sda1 sda2 sda3
	Attached scsi disk sda at scsi0, channel 0, id 0, lun 0