Fedora Core 3 x86_64 Install

[Thiago Guzella]

Ok, what's the AGP mode set on the BIOS?? If it is auto, try setting
it to the lowest possible sped (something like 2x or 4x)...

I had a similar problem using a Radeon 9200 on an A8V; graphic mode
would cause problems when the AGP mode was automatically set by the
BIOS. 4x works like a charm :P

I am still looking for an explanation on the cause of this problem...

On 5/22/05, linux user <linuxusr at cableone.net> wrote:
> > On Sun, 22 May 2005, linux user wrote:
> >
> > > This is my second request.  Any assistance is resolving this issue is
> > > appreciated...
> > >
> > >
> > > During the installation of Fedora Core 3 x86_64, anaconda
> > installer starts,
> > > vesa (generic video) detected, unknown monitor.  When the
> > x-server attempts
> > > to start, the video dies.  I tried booting with "linux nofb".  Only
> > > unreadable dialogs appear after using this.  I also attempted
> > to use nofb
> > > and specifying the resolution, and that didn't work either.
> >
> > run the text installer. when booting off the cd type:
> >
> > linux text
> >
> > once you've got the system installed you should be able to configure it
> > with:
> >
> > system-config-display
> >
> > which should work.
> 
> 
> Thanks Joel...  I'll give it a try.  Do you have any idea why the x86_32
> installation works as expected, and the x86_64 install bombs?
> 
> 
> >
> > > This problem is only present during the x86_64 installation.
> > There is no
> > > issue with the 32-bit installation.  My monitor (ViewSonic LCD VG191) is
> > > detected properly, and everything runs smooth.  I would like to
> > install the
> > > 64-bit version, since I purchased a 64-bit processor.
> > >
> > > Motherboard:        Gigabyte K8 Triton Micro ATX
> > >                     Socket 754 for AMD Athlon64 w/64-bit 3400+ CPU
> > >                     VIA VT8237 Chipset
> > >                     VIA K8M800 Chipset
> > >                             On-board UniChrome Pro Graphics S3 Pro IGP
> > > Hard drive:         Seagate SATA 200GB hard drive
> > > Monitor:            ViewSonic VG191 (LCD)
> > >
> > > Is there anyone on this list who has a solution?
> 
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> 


-- 
Thiago dos Santos Guzella
Electrical Enginnering Student - UFMG (www.ufmg.br), Brazil 
Linux User #354160
UIN: 13465286. Jabber: tguzella @ jabber.org

"Faith: not wanting to know what is true." 
Friedrich Nietzsche