USB Modem install problem

[Markku Kolkka]

Jean François Ortolo kirjoitti viestissään (lähetysaika torstai, 3. marraskuuta 2005 22:29):
> T:  Bus=02 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=ff MxPS=64 #Cfgs=  1
> P:  Vendor=145f ProdID=0106 Rev= 1.00 
> S:  Manufacturer=TRUST INTERNATIONAL B.V.
> S:  Product=Trust K56 V92 USB Modem
> S:  SerialNumber=00000018
> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=260mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms 
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=01 Prot=ff Driver=(none)

This shows that this isn't an ACM modem. ACM devices have Sub=02 and
Prot=01. Your modem is a "Direct Line Control" modem with a vendor-specific
protocol, in other words it's a Winmodem.

-- 
 Markku Kolkka
 markku.kolkka at iki.fi