pilot-link issues

lance raymond lance at darkerforce.com
Wed Nov 9 15:09:41 UTC 2005 

On Wed, 2005-11-09 at 12:38 +1100, Yuandan Zhang wrote: 
> > > my experience is that you press hotsync, with 1-2 seconds issue this
> > > command
> > > > > pilot-xfer -L -p /tmp/pilot
> > > good luck
> > ----
> > that's been my experience too...I think he may have created some rules
> > or permissions in udev that may be interfering though.
> > 
> > Craig
> I use /tmp/pilot as device for gpilot sync with evolution. It works nice
> on address, tasks. But unable to sync calendar. I initailly copy
> calendar from pilot to PC (to evolution) this worked. since, 
> sync  calendar failed. here is the log on this failure:
> 
> 
> 
> 
> gpilotd-Message: gnome-pilot 2.0.13 starting...
> gpilotd-Message: compiled for pilot-link version 0.12.0-pre4
> gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network]
> gpilotd-Message: Activating CORBA server
> gpilotd-Message: bonobo_activation_active_server_register = 0
> gpilotd-Message: Watching Cradle (/tmp/pilot)
> gpilotd-Message: Found 4766, 0001
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0502, 0736
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 091e, 0004
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 082d, 0100
> gpilotd-Message: Using net FALSE
> gpilotd-Message: Found 082d, 0200
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 082d, 0300
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0c88, 0021
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0001
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0002
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0003
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0020
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0031
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0040
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0050
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0060
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0061
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0070
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 0830, 0080
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 04e8, 8001
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 04e8, 6601
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 0038
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 0066
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 0095
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 009a
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 00c9
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 00da
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 00e9
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 0144
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 054c, 0169
> gpilotd-Message: Using net TRUE
> gpilotd-Message: Found 12ef, 0100
> gpilotd-Message: Using net TRUE
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Input/output error
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> gpilotd-Message: Cradle Cradle has 0 events
> gpilotd-Message: Instantiating 1 conduits...
> ecalconduit-Message: in calendar's conduit_get_gpilot_conduit
> 
> gpilotd-Message: Instantiated 0 backup conduits, 0 file conduits, 1
> other conduits
> gpilotd-Message: HotSync button pressed, synchronizing pilot
> gpilotd-Message: Pilot ID is 500, name is MyPilot, owner is yuandan
> gpilotd-Message: Pilot has 0 entries in restore queue
> gpilotd-Message: Pilot has 0 entries in conduit queue
> ecalconduit-Message:
> ---------------------------------------------------------
> 
> ecalconduit-Message: pre_sync: Calendar Conduit v.0.1.6
> ecalconduit-Message:   Using
> timezone: /softwarestudio.org/Olson_20011030_5/Australia/Sydney
> 
> (gpilotd:6573): gpilotd-WARNING **: Synchronization failed!
> gpilotd-Message: Synchronization ended
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Input/output error
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Socket operation on
> non-socket
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: Shutting down devices
> gpilotd-Message: Rereading configuration...
> gpilotd-Message: Watching Cradle (/tmp/pilot)
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such file or
> directory
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Success
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Success
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Success
> 
> (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: setting PILOTRATE=57600
> gpilotd-Message: Exiting (caught SIGTERM)...
> 
> 
--  Well well, it's a new day.  Tried that command again, pilot-xfer -L
-p /tmp/pilot on initial startup, made a connection, showed everthing.
Next since that worked, started jpilot, checked settings, made sure
device was set to /tmp/pilot, synced and yep, worked like a charm!

>From there, I went to evolution, hit the sync on the device and it just
sat there.  After that, tried to sync in jpilot again and it just hung.
I am not sure on the differences on what uses what, but if I don't sync
with evolution I can go back / forth in jpilot fine, so at least I have
that, but if I have evo open / active and hit sync, it hangs and only switching to 
run level 3 then back to 5 allows me to sync with jpilot again.

Just to make sure, the pilot settings are default, USB, 5 for timeout
and 56000 for speed, are those correct?

Thanks to all again, especially Craig for all the posts!

Lance

More information about the users mailing list