USB Scanner and FC4

[gary]

On Fri, 2005-11-18 at 19:14 -0600, John Pierce wrote:
> Gary, again thanks for your response.
> 
> I have tried both the net and local interface, the machine I am
> testing from is the local machine and generally speaking it has always
> been the net backend that is easiest to configure.
> 
> But from the local machine with both the epkowa and net interfaces
> enabled if I had a successful setup I would see both (the net and
> local) devices available upon startup of kooka.
> 
> xsane -L tells me there are no scanners available.
> 
> sane-find-scanner finds the scanner as usual and tells me that it
> cannot identify the scanner.  This is the same report that I used to
> get under FC3 and the scanner still worked.
> 
> As for Assumptions forget it, I should have mentioned that upfront.
> 
> John

Check out this thread - different os - similar problem.
http://www.nabble.com/Still-trying-to-get-Epson-CX6600-to-work.-t445617.html
                - gary