DHCP 2 placas

Manuel Arostegui Ramirez manuel at todo-linux.com
Fri Dec 15 16:06:55 UTC 2006


El Viernes, 15 de Diciembre de 2006 17:03, Sergio Silva escribió:
> Pessoall,
>
> Tenho um servidor fazendo as funções de roteador e DHCP ( 192.168.20.252 e
> 192.168.200.1).  Gostaria que somente a rede 192.168.200.0 fosse atendida
> pelo DHCP. Já coloquei a opção INTERFACES="eth1" no arquivo
> /etc/sysconfig/dhcp e nãso funcionou. Sempre que tento startar recebo a
> mensagem abaixo:
>
> Iniciando dhcpd: Internet Software Consortium DHCP Server V3.0pl1
> Copyright 1995-2001 Internet Software Consortium.
> All rights reserved.
> For info, please visit http://www.isc.org/products/DHCP
> Wrote 0 deleted host decls to leases file.
> Wrote 0 new dynamic host decls to leases file.
> Wrote 0 leases to leases file.
> Listening on LPF/eth1/aa:aa:aa:11:11:98/192.168.200.0/24
> Sending
>  on   LPF/eth1/aa:aa:aa:11:11:98/192.168.200.0/24
>
> No subnet declaration for eth0 (192.168.20.252).
> ** Ignoring requests on eth0.  If this is not what
>    you want, please write a subnet declaration
>    in your dhcpd.conf file for the network segment
>    to which interface eth0 is attached. **
>
> Can't bind to dhcp address: Address already in use
> Please make sure there is no other dhcp server
> running and that there's no entry for dhcp or
> bootp in /etc/inetd.conf.   Also make sure you
> are not running HP JetAdmin software, which
> includes a bootp server.
>
> If you did not get this software from ftp.isc.org, please
> get the latest from ftp.isc.org and install that before
> requesting help.
>
> If you did get this software from ftp.isc.org and have not
> yet read the README, please read it before requesting help.
> If you intend to request help from the
>  dhcp-server at isc.org
> mailing list, please read the section on the README about
> submitting bug reports and requests for help.
>
> Please do not under any circumstances send requests for
> help directly to the authors of this software - please
> send them to the appropriate mailing list as described in
> the README file.
>
> exiting.
>
>
>

Sergio, this is a english mailing list, so please, send your emails using 
Shakespeare's language :-)
Kind regards
-- 
Manuel Arostegui Ramirez.

Electronic Mail is not secure, may not be read every day, and should not
be used for urgent or sensitive issues.




More information about the users mailing list