xorg.conf help
Jeff Vian
jvian10 at charter.net
Tue Jun 13 23:30:46 UTC 2006
On Tue, 2006-06-13 at 11:56 -0700, Brian D. McGrew wrote:
> I made those changes as you said and it seems that now the display
> wants to go to 1920x1440 … which is waaay too big???
>
> :b!
>
> Brian D. McGrew { brian at visionpro.com || brian at doubledimension.com }
> --
> > This is a test. This is only a test!
> Had this been an actual emergency, you would have been
> told to cancel this test and seek professional assistance!
>
>
>
> ______________________________________________________________________
> From:fedora-list-bounces at redhat.com
> [mailto:fedora-list-bounces at redhat.com] On Behalf Of Kevac Marko
> Sent: Tuesday, June 13, 2006 11:21 AM
> To: For users of Fedora Core releases
> Subject: Re: xorg.conf help
>
>
>
>
> Try to add Modeline:
>
> Section "Monitor"
> Identifier "Monitor0"
> ModelName "Unknown monitor"
> ModeLine "1280x800" 83.5 1280 1344 1480 1680 800 801 804
> 828 -hsync +vsync
Try taking out this modeline, which may not be correct for your monitor.
> Option "dpms"
> EndSection
>
> And then:
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1280x800"
This should make it select an appropriate modeline that matches the
layout.
> EndSubSection
> EndSection
>
> On 6/13/06, Brian D. McGrew <brian at visionpro.com> wrote:
>
> Hello all,
>
> I'm installing in VMWare on a Sony Vaio notebook and so far, all is
> working very well, better than I expected.
>
> My only snag is that I need to get X to run at 1280x800 instead of
> 1280x960. I set the monitor as a Generic LCD at 1280x800 but still
> that
check the output in /var/log/Xorg.log.0 and see what it is actually
selecting.
Do you know the refresh rate of the screen? you might need to set that
explicitly. I had to that on my desktop system since the syncmaster LCD
panel screen could only do 1600X1200 at a vert refresh of 60hz. The
EDID values would not give it the 60Hz refresh so it had to be
overridden with my settings.
> is not an option on the resolution list; it still wants to do
> 1280x960.
> What do I need to set in my xorg.conf to recognize 1280x800?
>
> Thanks,
>
> :b!
>
>
>
> --
> Kevac Marko
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
More information about the users
mailing list