sdhci does not work
Trond Danielsen
trond.danielsen at gmail.com
Sun Jun 25 08:13:23 UTC 2006
On 6/25/06, Trond Danielsen <trond.danielsen at gmail.com> wrote:
> Hi,
>
> i am running Fedora Core 5 with the latest kernel ( Version: 2.6.17,
> Release: 1.2139_FC5 ). From what I understand the sdhci driver has
> been included in kernels > 2.6.17-rc1, and lsmod seems to agree with
> me :). The problem is that nothing happends when I insert a multi
> media card (mmc), nothing happend. I have included the output of
> dmesg, lsmod and lspci. As you can see, all the relevant modules
> should have been loaded.
>
> ------------------------------------------------------------------
> Linux version 2.6.17-1.2139_FC5
> (brewbuilder at hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20060525
> (Red Hat 4.1.1-1)) #1 Fri Jun 23 12:40:16 EDT 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001efc0000 (usable)
> BIOS-e820: 000000001efc0000 - 000000001efcf000 (ACPI data)
> BIOS-e820: 000000001efcf000 - 000000001f000000 (ACPI NVS)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 495MB LOWMEM available.
> found SMP MP-table at 000ff780
> Using x86 segment limits to approximate NX protection
> On node 0 totalpages: 126912
> DMA zone: 4096 pages, LIFO batch:0
> Normal zone: 122816 pages, LIFO batch:31
> DMI 2.3 present.
> ACPI: RSDP (v000 ACPIAM ) @ 0x000f6a40
> ACPI: RSDT (v001 A M I OEMRSDT 0x06000514 MSFT 0x00000097) @ 0x1efc0000
> ACPI: FADT (v002 A M I OEMFACP 0x06000514 MSFT 0x00000097) @ 0x1efc0200
> ACPI: MADT (v001 A M I OEMAPIC 0x06000514 MSFT 0x00000097) @ 0x1efc0390
> ACPI: MCFG (v001 A M I OEMMCFG 0x06000514 MSFT 0x00000097) @ 0x1efc03f0
> ACPI: OEMB (v001 A M I AMI_OEM 0x06000514 MSFT 0x00000097) @ 0x1efcf040
> ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x1efc83e0
> ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 6:13 APIC version 20
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 20000000 (gap: 1f000000:dfd14000)
> Built 1 zonelists
> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c075b000 soft=c075a000
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Detected 1729.275 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 497160k/507648k available (2063k kernel code, 9944k reserved,
> 1127k data, 216k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 3462.20 BogoMIPS (lpj=6924406)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000
> 00000180 00000000 00000000
> CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000
> 00000180 00000000 00000000
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000040
> 00000180 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
> Checking 'hlt' instruction... OK.
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking if image is initramfs... it is
> Freeing initrd memory: 1662k freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
> Setting up standard PCI resources
> ACPI: Subsystem revision 20060127
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:00:02.0
> PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
> PCI quirk: region 0480-04bf claimed by ICH6 GPIO
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02)
> (try 'pci=assign-busses')
> Please report the result to linux-kernel to fix this permanently
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
> ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 12)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 12)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
> ACPI: Power Resource [GFAN] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 13 devices
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
> PCI: Bus 2, cardbus bridge: 0000:01:03.0
> IO window: 0000d000-0000d0ff
> IO window: 0000d400-0000d4ff
> PREFETCH window: 20000000-21ffffff
> MEM window: 22000000-23ffffff
> PCI: Bridge: 0000:00:1e.0
> IO window: d000-dfff
> MEM window: fe800000-fe8fffff
> PREFETCH window: 20000000-21ffffff
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 169
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
> TCP: Hash tables configured (established 16384 bind 8192)
> TCP reno registered
> apm: BIOS not found.
> audit: initializing netlink socket (disabled)
> audit(1151221507.172:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key 771D97EA73175C83
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: Fan [FN00] (off)
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI: Thermal Zone [THRM] (40 C)
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected an Intel 915GM Chipset.
> agpgart: Detected 16124K stolen memory.
> agpgart: AGP aperture is 256M @ 0xd0000000
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH6: IDE controller at PCI slot 0000:00:1f.1
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
> ICH6: chipset revision 4
> ICH6: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: FUJITSU MHV2060AT PL, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> Probing IDE interface ide1...
> hda: max request size: 128KiB
> hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
> ide-floppy driver 0.99.newide
> ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 169
> Yenta: CardBus bridge found at 0000:01:03.0 [1043:1997]
> Yenta: ISA IRQ mask 0x04b8, PCI irq 169
> Socket status: 30000006
> pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
> cs: IO port probe 0xd000-0xdfff: clean.
> pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff
> pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
> usbcore: registered new driver libusual
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> ACPI wakeup devices:
> P0P1 LAN0 CBS0 CBS1 MPCI USB1 USB2 USB3 USB4 EUSB MC97 AZAL SLPB
> ACPI: (supports S0 S3 S4 S5)
> Freeing unused kernel memory: 216k freed
> Write protecting the kernel read-only data: 705k
> input: AT Translated Set 2 keyboard as /class/input/input0
> device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel at redhat.com
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Synaptics Touchpad, model: 1, fw: 5.9, id: 0x116eb1, caps: 0xa04713/0x0
> input: SynPS/2 Synaptics TouchPad as /class/input/input1
> security: 3 users, 6 roles, 1417 types, 151 bools, 1 sens, 256 cats
> security: 57 classes, 41080 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev dm-0, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> audit(1151221512.224:2): policy loaded auid=4294967295
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> hw_random hardware driver 1.0.0 loaded
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 185
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
> hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...
> sdhci: Secure Digital Host Controller Interface driver, 0.11
> sdhci: Copyright(c) Pierre Ossman
> ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 20 (level, low) -> IRQ 193
> 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
> mmc0: SDHCI at 0xfe8fe000 irq 193 PIO
> 8139cp: pci dev 0000:01:04.0 (id 10ec:8139 rev 10) is not an 8139C+
> compatible chip
> 8139cp: Try the "8139too" driver instead.
> ieee80211_crypt: registered algorithm 'NULL'
> cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
> cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0xc00-0xcf7: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000e400
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000e480
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ieee80211: 802.11 data/management/control stack, git-1.1.7
> ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000e800
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1
> ipw2200: Copyright(c) 2003-2006 Intel Corporation
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 185
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.3: irq 185, io base 0x0000e880
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 20 (level, low) -> IRQ 193
> eth0: RealTek RTL8139 at 0xdf83cc00, 00:15:f2:94:b3:1f, IRQ 193
> eth0: Identified 8139 chip type 'RTL-8101'
> ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 177
> ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfeb3fc00
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 8 ports detected
> ieee1394: Initialized config rom entry `ip1394'
> ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
> ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 22 (level, low) -> IRQ 217
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217]
> MMIO=[fe8fd800-fe8fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003499415]
> floppy0: no floppy controllers found
> lp: driver loaded but no devices found
> SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
> ACPI: AC Adapter [AC0] (on-line)
> Asus Laptop ACPI Extras version 0.29
> no string returned by INIT
> trying default values, supply the developers with your DSDT
> ACPI: Battery Slot [BAT0] (battery present)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Lid Switch [LID]
> ibm_acpi: ec object not found
> ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
> ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT3 FS on dm-0, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda3, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> Adding 1015800k swap on /dev/VolGroup00/LogVol01. Priority:-1
> extents:1 across:1015800k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> ip_tables: (C) 2000-2006 Netfilter Core Team
> Netfilter messages via NETLINK v0.30.
> ip_conntrack version 2.4 (3966 buckets, 31728 max) - 224 bytes per conntrack
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> Bluetooth: Core ver 2.8
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM ver 1.7
> Bluetooth: HIDP (Human Interface Emulation) ver 1.1
> i2c /dev entries driver
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> eth0: link down
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> [drm] Initialized drm 1.0.1 20051102
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 185
> [drm] Initialized i915 1.4.0 20060119 on minor 0
> ------------------------------------------------------------------
>
> ------------------------------------------------------------------
> 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML
> Express Processor to DRAM Controller (rev 04)
> 00:02.0 VGA compatible controller: Intel Corporation Mobile
> 915GM/GMS/910GML Express Graphics Controller (rev 04)
> 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML
> Express Graphics Controller (rev 04)
> 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) High Definition Audio Controller (rev 04)
> 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #1 (rev 04)
> 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #2 (rev 04)
> 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #3 (rev 04)
> 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #4 (rev 04)
> 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB2 EHCI Controller (rev 04)
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface
> Bridge (rev 04)
> 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) IDE Controller (rev 04)
> 01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
> 01:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
> 01:03.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
> Adapter (rev 17)
> 01:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
> Adapter (rev 08)
> 01:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)
> 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
> ------------------------------------------------------------------
>
> ------------------------------------------------------------------
> Module Size Used by
> i915 18369 2
> drm 70229 3 i915
> autofs4 21701 1
> i2c_dev 9413 0
> i2c_core 22209 1 i2c_dev
> hidp 16833 2
> rfcomm 37333 0
> l2cap 23873 10 hidp,rfcomm
> bluetooth 47909 5 hidp,rfcomm,l2cap
> sunrpc 157309 1
> ip_conntrack_netbios_ns 3265 0
> ipt_REJECT 5569 1
> xt_state 2497 7
> ip_conntrack 52597 2 ip_conntrack_netbios_ns,xt_state
> nfnetlink 7257 1 ip_conntrack
> xt_tcpudp 3393 9
> iptable_filter 3265 1
> ip_tables 12809 1 iptable_filter
> x_tables 14917 4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
> video 16708 0
> button 6993 0
> battery 10053 0
> asus_acpi 12373 0
> ac 5189 0
> ipv6 242785 14
> lp 12937 0
> parport_pc 27237 0
> parport 37129 2 lp,parport_pc
> ohci1394 34693 0
> ieee1394 298649 1 ohci1394
> ehci_hcd 32461 0
> ipw2200 103581 0
> 8139too 27073 0
> ieee80211 31625 1 ipw2200
> uhci_hcd 23885 0
> ieee80211_crypt 6849 1 ieee80211
> 8139cp 22977 0
> joydev 9985 0
> mii 5697 2 8139too,8139cp
> sdhci 15813 0
> mmc_core 26049 1 sdhci
> snd_hda_intel 18389 1
> snd_hda_codec 137537 1 snd_hda_intel
> snd_seq_dummy 4165 0
> snd_seq_oss 32705 0
> snd_seq_midi_event 7745 1 snd_seq_oss
> snd_seq 53553 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_seq_device 9037 3 snd_seq_dummy,snd_seq_oss,snd_seq
> snd_pcm_oss 40017 0
> snd_mixer_oss 17729 1 snd_pcm_oss
> snd_pcm 83781 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_timer 24517 2 snd_seq,snd_pcm
> snd 55237 11
> snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> hw_random 6361 0
> soundcore 10017 1 snd
> snd_page_alloc 10569 2 snd_hda_intel,snd_pcm
> dm_snapshot 18285 0
> dm_zero 2241 0
> dm_mirror 22673 0
> dm_mod 59225 6 dm_snapshot,dm_zero,dm_mirror
> ext3 129097 2
> jbd 57813 1 ext3
> ------------------------------------------------------------------
> --
> Trond Danielsen
>
Problem solved! Just had to modprobe mmc_block my self. Should this be
reported as a bug in hal or udev?
--
Trond Danielsen
More information about the users
mailing list