FreeNX on FC6 authentication problem

[Art Fore]

On 11/15/06, Craig White <craigwhite at azapple.com> wrote:
>
> On Wed, 2006-11-15 at 12:16 +0800, Art Fore wrote:
> >
> >
> > On 11/15/06, Craig White <craigwhite at azapple.com> wrote:
> >         On Wed, 2006-11-15 at 10:58 +0800, Art Fore wrote:
> >         >
> >         >
> >         > On 11/14/06, Dr. Michael J. Chudobiak <mjc at avtechpulse.com>
> >         wrote:
> >         >
> >         >
> >         >         Art, here are some tips:
> >         >
> >         >         1) In the past, I found I had to run "passwd -uf nx"
> >         to enable
> >         >         the nx
> >         >         user. The rpm didn't do it properly for some reason.
> >         >
> >         >         2) Make sure the client enables SSL encryption.
> >         >
> >         >         3) The rpm didn't uninstall properly, which really
> >         messed
> >         >         things up. If
> >         >         you try to uninstall it, use rpm -evvv to get a
> >         verbose output
> >         >         to see
> >         >         which files are causing trouble.
> >         >
> >         > Done the passwd -uf nx which reported success. SSL
> >         encription is
> >         > enabled. Still no luck. Client comes back with
> >         > NX> 202 Authenticating user: nx
> >         > NX> 208 Using auth method: publickey
> >         > NX> 204 Authentication failed.
> >         >
> >         > Log file on server has Received signal 15, terminating.
> >         >
> >         > So, any further suggestions?
> >         ----
> >         get the file
> >         /etc/nxserver/client.id_dsa.pub
> >         from the server
> >
> >         paste it into the key on the client
> >
> > Copied the file to c:/documents and settings/art.fore/.ssh and .nx and
> > to c:\program files\nx client for windows\share\keys. Now the client
> > comes up with the same error, the server log only comes up with
> > connection closed by MailScanner warning: numerical links are often
> > malicious:10.18.31.29 (client IP address)
> >
> > What next?
> ----
> keep failing until you follow instructions I would suppose
>
> Craig
>
Well, I followed instructions as best I could given that they were rather
sparse. I uninstalled everything and reinstaleld and started over with the
website instractions mentioned earlier, which by the way have errors and got
to the same point as before. I did find that importing the
client.id_dsa.pubwith the import button on the client, configure,
general tab got me to where
nx now authenticates, but now my login with my user name and password does
not authenticate and I am using the correct name and password. What key or
file controls this and how do I get nx to find it? is it one of the keys
generated before? If so, which one? I am not at all clear on these keys as
there is no real explanation of what is for what. (I also get the same thing
from an nxclient on the server)

Art
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/users/attachments/20061115/9223f9ad/attachment-0002.html