Is this result from lm_sensors ok? (a7n8x VM/400 mobo)

[Wolfgang]

On Sun, 2006-11-26 at 01:24 +0000, Vijay Gill wrote:
> Hi,
> 
> I am having trouble with the stability of my FC6 machine using the
> said mobo and ARIA case. Compiling of mplayer causes crashing of gcc,
> encoding using mencoder always ends in mencoder crashing. So I thought
> of looking into power supply and temperatures.
> 
> After installing lm_sensors, this is the out put I get. The value of
> VCore 2 worries me. Can somebody give some pointers?
> 
> [root at aria ~]# sensors
> it8712-isa-0d00
> Adapter: ISA adapter
> VCore 1:   +1.63 V  (min =  +1.42 V, max =  +1.57 V)   ALARM
> VCore 2:   +4.08 V  (min =  +2.40 V, max =  +2.61 V)   ALARM
> +3.3V:     +3.31 V  (min =  +3.14 V, max =  +3.47 V)
> +5V:       +4.89 V  (min =  +4.76 V, max =  +5.24 V)
> +12V:     +12.16 V  (min = +11.39 V, max = +12.61 V)
> -12V:      +3.93 V  (min = -12.63 V, max = -11.41 V)   ALARM
> -5V:       +4.03 V  (min =  -5.26 V, max =  -4.77 V)   ALARM
> Stdby:     +6.85 V  (min =  +4.76 V, max =  +5.24 V)   ALARM
> VBat:      +4.08 V
> fan1:     2445 RPM  (min =    0 RPM, div = 4)
> fan2:        0 RPM  (min = 2636 RPM, div = 128)          ALARM
> fan3:        0 RPM  (min = 3000 RPM, div = 2)
> M/B Temp:    +45°C  (low  =   +15°C, high =   +40°C)   sensor = diode
> CPU Temp:    +37°C  (low  =   +15°C, high =   +45°C)   sensor = thermistor
> Temp3:        -1°C  (low  =   +15°C, high =   +45°C)   sensor = disabled
> 
> Vijay
> 

What does the BIOS say about those voltages?? Are you running the latest
BIOS?? .. The lm-sensor output may very well be wrong, as most of the
settings are generic. After scanning though the Asus forums for the last
month or so (Due to instabilities of my system. Random lockups, and
rebooting etc..), I found that a lot of the Asus motherboard problems
were due to incorrect RAM timings and RAM Voltage settings.. (I've now
setup my board manually using the Corsair specs of my RAM and my system
is now rock solid). It seems that the Asus BIOS doesn't set this stuff
up properly.. Which can (And will) cause system instability. I was
blaming FC5 kernels for this, and I was wrong.. All good for me now...

It might be worth checking that out and see how you go with that..

Wolf