FC6 and Marvell Yukon network card
Don Raikes
don.raikes at oracle.com
Wed Nov 29 23:20:45 UTC 2006
Ok, I did that, and when I ping my router I get a response just fine.
However, if I try to ping anything else, I get:
connect: network unreachable
-----Original Message-----
From: fedora-list-bounces at redhat.com
[mailto:fedora-list-bounces at redhat.com]On Behalf Of Rick Stevens
Sent: Wednesday, November 29, 2006 4:05 PM
To: For users of Fedora
Subject: RE: FC6 and Marvell Yukon network card
On Wed, 2006-11-29 at 15:10 -0700, Don Raikes wrote:
> I ran:
>
> modprobe sky2
>
> and got some good feedback.
> I then ran
>
> ifup eth0
>
> no output.
>
> I ran:
>
> ifconfig and got:
> eth0 Link encap:Ethernet HWaddr 00:11:11:B2:ED:CC
> inet addr:192.168.0.125 Bcast:192.168.0.125 Mask:255.255.255.255
That's your problem. Try "ifconfig eth0 netmask 255.255.255.0" and try
pinging your router then. Also fix /etc/sysconfig/ifcfg-eth0 and fix
the netmask there for future boots.
> inet6 addr: fe80::211:11ff:feb2:edcc/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:5702 (5.5 KiB)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:56 errors:0 dropped:0 overruns:0 frame:0
> TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:10761 (10.5 KiB) TX bytes:10761 (10.5 KiB)
>
> vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> RX packets:144 errors:0 dropped:0 overruns:0 frame:0
> TX packets:4774 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:14876 (14.5 KiB) TX bytes:1471983 (1.4 MiB)
>
> xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> RX packets:4469 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:1371625 (1.3 MiB) TX bytes:0 (0.0 b)
>
> Finally, I ran
>
> ping 192.168.0.1 (my router)
>
> I got unable to reach network.
>
> I feel like there is a step I forgot.
> -----Original Message-----
> From: fedora-list-bounces at redhat.com
> [mailto:fedora-list-bounces at redhat.com]On Behalf Of GérardMilmeister
> Sent: Wednesday, November 29, 2006 2:36 PM
> To: For users of Fedora
> Subject: Re: FC6 and Marvell Yukon network card
>
>
> On Wed, 2006-11-29 at 14:20 -0700, Don Raikes wrote:
> > Hello,
> >
> > I just installed FC6 on my gateway computer. The computer has a Marvell Yukon 88E8050 network chipset, and now I have no network support.
> >
> > I found a copy of the sk98lin driver for fc6 in rpm format, but it was for the upgraded kernel 2.6.18-1.2849fc6, but my installed kernel is 2.6.18-1.2798fc6.
> >
> > I downloaded the manufacturer's installation package, but when I try to compile it I keep getting errors saying that there are problems with the kernel headers.
> >
> > I downloaded and installedthe kernel sources as discussed at:
> > http://www.g-loaded.eu/2005/12/14/the-complete-fedora-kernel-headers/
> The sk98lin is obsolete, I think. You should try with sky2.
> --
> Gérard Milmeister
> Langackerstrasse 49
> CH-8057 Zürich
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- Grabel's Law: 2 is not equal to 3--not even for large values of 2. -
----------------------------------------------------------------------
--
fedora-list mailing list
fedora-list at redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
More information about the users
mailing list