ata failed messages - kernel 2.6.18-1.2200.fc5
Kam Leo
kam.leo at gmail.com
Tue Oct 17 17:21:27 UTC 2006
On 10/17/06, Alan J. Gagne <alan.gagne at comcast.net> wrote:
> Receiving failure messages during boot for ata1 and ata2.
> Machine boots and seems to be running ok.
>
> ata1: port is slow to respond, please be patient
> ata1: port failed to respond (30 secs)
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: softreset failed, retrying in 5 secs
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: softreset failed, retrying in 5 secs
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: reset failed, giving up
> scsi1 : ata_piix
> ata2: port is slow to respond, please be patient
> ata2: port failed to respond (30 secs)
> ata2: SRST failed (status 0xFF)
> ata2: SRST failed (err_mask=0x100)
> ata2: softreset failed, retrying in 5 secs
> ata2: SRST failed (status 0xFF)
> ata2: SRST failed (err_mask=0x100)
> ata2: softreset failed, retrying in 5 secs
> ata2: SRST failed (status 0xFF)
> ata2: SRST failed (err_mask=0x100)
> ata2: reset failed, giving up
>
>
>
> [root at linux1 ~]# lspci
> 00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller
> Hub (rev 02)
> 00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller
> (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #3 (rev 02)
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
> UHCI Controller #4 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
> EHCI Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
> Interface Bridge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> Controller (rev 02)
> 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller
> (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
> Controller (rev 02)
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350
> [Radeon 9800 Pro]
> 01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon
> 9800 Pro] (Secondary)
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
> Gigabit Ethernet (rev 10)
> 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
> Gigabit Ethernet (rev 10)
> 02:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 46)
> 02:03.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
> 02:03.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev
> 04)
> 02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
> Controller (rev 02)
>
> [root at linux1 ~]# dmesg
> Linux version 2.6.18-1.2200.fc5
> (brewbuilder at hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20060525
> (Red Hat 4.1.1-1)) #1 Sat Oct 14 16:59:26 EDT 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000009ff74000 (usable)
> BIOS-e820: 000000009ff74000 - 000000009ff76000 (ACPI NVS)
> BIOS-e820: 000000009ff76000 - 000000009ff97000 (ACPI data)
> BIOS-e820: 000000009ff97000 - 00000000a0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> 1663MB HIGHMEM available.
> 896MB LOWMEM available.
> found SMP MP-table at 000fe710
> Using x86 segment limits to approximate NX protection
> On node 0 totalpages: 655220
> DMA zone: 4096 pages, LIFO batch:0
> Normal zone: 225280 pages, LIFO batch:31
> HighMem zone: 425844 pages, LIFO batch:31
> DMI 2.3 present.
> ACPI: RSDP (v000 DELL ) @ 0x000feb90
> ACPI: RSDT (v001 DELL 8300 0x00000007 ASL 0x00000061) @
> 0x000fd1d6
> ACPI: FADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @
> 0x000fd20a
> ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @
> 0xfffc9219
> ACPI: MADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @
> 0x000fd27e
> ACPI: BOOT (v001 DELL 8300 0x00000007 ASL 0x00000061) @
> 0x000fd2ea
> ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @
> 0x00000000
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:2 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 15:2 APIC version 20
> WARNING: NR_CPUS limit of 1 reached. Processor ignored.
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at a8000000 (gap: a0000000:5ec00000)
> Detected 3059.071 MHz processor.
> Built 1 zonelists. Total pages: 655220
> Kernel command line: ro root=LABEL=/ quiet
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c075b000 soft=c075a000
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 2593152k/2620880k available (2041k kernel code, 26340k reserved,
> 801k data, 220k init, 1703376k highmem)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
> Calibrating delay using timer specific routine.. 6122.18 BogoMIPS
> (lpj=12244373)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
> 00004400 00000000 00000000
> CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
> 00004400 00000000 00000000
> CPU: Trace cache: 12K uops, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU0: Thermal monitoring enabled
> CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 07
> Checking 'hlt' instruction... OK.
> ACPI: Core revision 20060707
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking if image is initramfs... it is
> Freeing initrd memory: 1095k freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfbb3c, last bus=2
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
> PCI quirk: region 0880-08bf claimed by ICH4 GPIO
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Boot video device is 0000:01:00.0
> PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 11 devices
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> pnp: 00:0a: ioport range 0x800-0x85f could not be reserved
> pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved
> pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved
> PCI: Bridge: 0000:00:01.0
> IO window: d000-dfff
> MEM window: fe900000-feafffff
> PREFETCH window: e8000000-f7ffffff
> PCI: Bridge: 0000:00:1e.0
> IO window: c000-cfff
> MEM window: fe700000-fe8fffff
> PREFETCH window: a8000000-a80fffff
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> Simple Boot Flag value 0x87 read from CMOS RAM was invalid
> Simple Boot Flag at 0x7a set to 0x1
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> audit(1161021007.840:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key AFB81CC8AAE721BE
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: Getting cpuindex for acpiid 0x2
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected an Intel i875 Chipset.
> agpgart: AGP aperture is 128M @ 0xe0000000
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> ICH5: IDE controller at PCI slot 0000:00:1f.1
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
> ICH5: chipset revision 2
> ICH5: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
> Probing IDE interface ide0...
> hda: WDC WD1200JB-75CRA0, ATA DISK drive
> hdb: ST3120023A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
> hdd: SAMSUNG CD-R/RW SW-248F, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: Host Protected Area detected.
> current capacity is 234375000 sectors (120000 MB)
> native capacity is 234441648 sectors (120034 MB)
> hda: Host Protected Area disabled.
> hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63,
> UDMA(100)
> hda: cache flushes not supported
> hda: hda1 hda2 hda3
> hdb: max request size: 128KiB
> hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63,
> UDMA(100)
> hdb: cache flushes supported
> hdb: hdb1
> ide-floppy driver 0.99.newide
> usbcore: registered new driver libusual
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
> PNP: PS/2 controller doesn't have AUX irq; using default 12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> ACPI: (supports S0 S1 S3 S4 S5)
> Freeing unused kernel memory: 220k freed
> Write protecting the kernel read-only data: 377k
> Time: tsc clocksource has been installed.
> input: AT Translated Set 2 keyboard as /class/input/input0
> SCSI subsystem initialized
> libata version 2.00 loaded.
> ata_piix 0000:00:1f.2: version 2.00
> ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 169
> ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 169
> scsi0 : ata_piix
> ata1: port is slow to respond, please be patient
> ata1: port failed to respond (30 secs)
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: softreset failed, retrying in 5 secs
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: softreset failed, retrying in 5 secs
> ata1: SRST failed (status 0xFF)
> ata1: SRST failed (err_mask=0x100)
> ata1: reset failed, giving up
> scsi1 : ata_piix
> ata2: port is slow to respond, please be patient
> ata2: port failed to respond (30 secs)
> ata2: SRST failed (status 0xFF)
> ata2: SRST failed (err_mask=0x100)
> ata2: softreset failed, retrying in 5 secs
> ata2: SRST failed (status 0xFF)
> ata2: SRST failed (err_mask=0x100)
> ata2: softreset failed, retrying in 5 secs
> ata2: SRST failed (status 0xFF)
> ata2: SRST failed (err_mask=0x100)
> ata2: reset failed, giving up
> device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
> dm-devel at redhat.com
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> security: 3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
> security: 58 classes, 43474 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev hda3, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses
> genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses
> genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses
> genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> audit(1161021092.613:2): policy loaded auid=4294967295
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> EDAC MC: Ver: 2.0.1 Oct 14 2006
> EDAC i82875p: i82875p init one
> PCI: Unable to reserve mem region #1:1000 at fecf0000 for device
> 0000:00:06.0
> EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0
> hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
> input: PC Speaker as /class/input/input1
> Intel 82802 RNG detected
> r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 185
> eth0: Identified chip type is 'RTL8169s/8110s'.
> eth0: RTL8169 at 0xf88d8e00, 00:14:6c:30:ad:6d, IRQ 185
> r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
> ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 193
> eth1: Identified chip type is 'RTL8169s/8110s'.
> eth1: RTL8169 at 0xf88daf00, 00:14:6c:2e:1e:75, IRQ 193
> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 201
> e100: eth2: e100_probe: addr 0xfe7fb000, irq 201, MAC addr
> 00:07:E9:7B:92:A5
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 209
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ff80
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000ff60
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ieee1394: Initialized config rom entry `ip1394'
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ff40
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 209
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.3: irq 209, io base 0x0000ff20
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 1-1: new low speed USB device using uhci_hcd and address 2
> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 217
> Installing spdif_bug patch: Audigy 2 ZS [SB0353]
> ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 225, io mem 0xffa80800
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 8 ports detected
> ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 177
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177]
> MMIO=[fe7fa000-fe7fa7ff] Max Packet=[2048] IR/IT contexts=[8/8]
> ACPI: PCI Interrupt 0000:02:03.2[B] -> GSI 18 (level, low) -> IRQ 169
> ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[169]
> MMIO=[fe7fa800-fe7fafff] Max Packet=[2048] IR/IT contexts=[4/8]
> usb 1-1: device not accepting address 2, error -71
> usb 1-1: new low speed USB device using uhci_hcd and address 4
> usb 1-1: configuration #1 chosen from 1 choice
> input: Logitech USB Receiver as /class/input/input2
> input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000003d70]
> ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c00a100aa81]
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> lp0: using parport0 (interrupt-driven).
> lp0: console ready
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [VBTN]
> ibm_acpi: ec object not found
> ieee1394: Node added: ID:BUS[1-02:1023] GUID[00110600000040fa]
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT3 FS on hda3, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev hda1, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev dm-0, type ext3), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev dm-1, type ext3), uses xattr
> Adding 4096564k swap on /dev/hda2. Priority:-1 extents:1
> across:4096564k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
> genfs_contexts
> r8169: eth0: link up
> r8169: eth1: link up
> audit(1161035515.655:3): audit_pid=1844 old=0 by auid=4294967295
> subj=system_u:system_r:auditd_t:s0
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
> genfs_contexts
> vmmon: module license 'unspecified' taints kernel.
> /dev/vmmon[1993]: Module vmmon: registered with major=10 minor=165
> /dev/vmmon[1993]: Module vmmon: initialized
> /dev/vmnet: open called by PID 2022 (vmnet-bridge)
> /dev/vmnet: hub 0 does not exist, allocating memory.
> /dev/vmnet: port on hub 0 successfully opened
> bridge-eth0: enabling the bridge
> bridge-eth0: up
> bridge-eth0: already up
> bridge-eth0: attached
> /dev/vmnet: open called by PID 2031 (vmnet-natd)
> /dev/vmnet: hub 8 does not exist, allocating memory.
> /dev/vmnet: port on hub 8 successfully opened
> Bluetooth: Core ver 2.10
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.8
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: HIDP (Human Interface Emulation) ver 1.1
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
> SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
> NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
> directory
> NFSD: starting 90-second grace period
> /dev/vmnet: open called by PID 2441 (vmnet-netifup)
> /dev/vmnet: port on hub 8 successfully opened
> /dev/vmnet: open called by PID 2471 (vmnet-dhcpd)
> /dev/vmnet: port on hub 8 successfully opened
> eth1: no IPv6 routers present
> eth0: no IPv6 routers present
> vmnet8: no IPv6 routers present
> [fglrx] Maximum main memory to use for locked dma buffers: 2397 MBytes.
> [fglrx] module loaded - fglrx 8.29.6 [Sep 19 2006] on minor 0
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
> [fglrx] Internal AGP support requested, but kernel AGP support active.
> [fglrx] Have to use kernel AGP support to avoid conflicts.
> [fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset)
> agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
> agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
> [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
> [fglrx] total GART = 134217728
> [fglrx] free GART = 118222848
> [fglrx] max single GART = 118222848
> [fglrx] total LFB = 126873600
> [fglrx] free LFB = 116387840
> [fglrx] max single LFB = 116387840
> [fglrx] total Inv = 0
> [fglrx] free Inv = 0
> [fglrx] max single Inv = 0
> [fglrx] total TIM = 0
>
>
Are you seeking affirmation of your situation or complaining about the
error messages?
If your system is not operating properly file a bug or an RFE (request
for enhancement) report in Bugzilla regarding the error messages. The
driver probably needs a little tweaking to accommodate your
controller/hard drives. Either way, the developers can use the
feedback.
More information about the users
mailing list