the clock stopped in F7 ?!

[Tim]

On Sun, 2007-08-26 at 16:26 -0700, Mike wrote:
> Try 'cat /proc/interrupts | grep timer' two times or more.
> 
> Look at the number just to the right of '0:'
> 
> This should have incremented a bunch in between cat's.  If it didn't
> then you likely have a hardware problem or the timer is failing to get
> initialized.  If it is incrementing then I'm stumped... 

I don't have the original poster's problem, but I tried that command to
see what happens.  The same results, each time:

[root at bigblack ~]# cat /proc/interrupts | grep timer
  0:        180   IO-APIC-edge      timer

-- 
[tim at bigblack ~]$ uname -ipr
2.6.22.1-41.fc7 i686 i386

Using FC 4, 5, 6 & 7, plus CentOS 5.  Today, it's FC7.

Don't send private replies to my address, the mailbox is ignored.
I read messages from the public lists.