Broadcom 4318 wireless again ...

[John W. Linville]

On Mon, Aug 27, 2007 at 06:25:40PM +0200, Klaus-Peter Schrage wrote:

> I have found a good place to load the bcm43xx driver to be rc.sysinit, 
> to where I moved the two lines from rc.local after line 301, right after 
> the 'fix console loglevel'  block. When the driver gets loaded thus 
> early, wpa_supplicant should be ok.

FWIW, dwmw2 pointed-out to me that a cleaner solution is to drop
the attached file into /etc/modprobe.d and remove the lines put into
/etc/modprobe.d/blacklist and /etc/rc.local by the bcm43xx-old-config
script.

John
-- 
John W. Linville
linville at redhat.com
-------------- next part --------------
blacklist bcm43xx-mac80211
install pci:v000014E4d00004307sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4307" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004311sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4311" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004312sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4312" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004318sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4318" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004319sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4319" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004320sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4320" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004321sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4321" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004324sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4324" > /sys/bus/pci/drivers/bcm43xx/new_id
install pci:v000014E4d00004325sv*sd*bc*sc*i* /sbin/modprobe --ignore-install bcm43xx && echo "14e4 4325" > /sys/bus/pci/drivers/bcm43xx/new_id