FC6 not connecting -- amplification
Rick Stevens
rstevens at vitalstream.com
Thu Feb 1 00:02:06 UTC 2007
On Wed, 2007-01-31 at 18:50 -0500, Jim Cornette wrote:
> Beartooth wrote:
> >su -
>
> > NOW lspci and lsmod work strait from the prompt, sure enough -- and lspci
> > | grep -i net gives me (retyping) "00:09.0 Ethernet controller: Intel
> > Corporation 82557/8/9 [Ethernet Pro 100] (rev 10)" -- and no mention of
> > any other ethernet anything, 3c501 or otherwise.
> >
> >
> The 3c501 could be removed. You might want to investigate whether the
> Intel 82557/8/9 is supported and by what driver.
Should be the "e100" driver. According to the source code:
* I. General
*
* The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
* controller family, which includes the 82557, 82558, 82559,
* 82550, 82551, and 82562 devices. 82558 and greater controllers
* integrate the Intel 82555 PHY. The controllers are used in
* server and client network interface cards, as well as in
* LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
* configurations. 8255x supports a 32-bit linear addressing
* mode and operates at 33Mhz PCI clock rate.
So verify that the "e100" driver is loaded via "/sbin/lsmod".
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- "And on the seventh day, He exited from append mode." -
----------------------------------------------------------------------
More information about the users
mailing list