Multimedia controller: ATI Technologies Inc Unknown device 4d52 ??
Phil Meyer
pmeyer at themeyerfarm.com
Tue Jan 2 04:59:22 UTC 2007
William Case wrote:
> By the way;
>
> Both the tvtime and bttv web sites *seem* to indicate that they are good
> for using any ATI TV Wonder card. ??
>
> On Mon, 2007-01-01 at 21:20 -0500, William Case wrote:
>
>> Hi Phil;
>>
>> Thank you. Finally, some help.
>>
>> I have no /dev/video0 or /dev/video (or /dev/radio). In WindowsXP both
>> the TV and the FM Radio work so I assume the card is physically
>> installed correctly. See below.
>>
>>
> [snip]
>
>> It seems Kudzu or whatever isn't even recognizing the existence of my
>> card, much less trying to supply a module or driver. Tried bttv, bt878
>> and cx88.
>>
>
> lsmod | grep bttv returns
> bttv 178101 1 bt878
> video_buf 28997 1 bttv
> ir_common 32197 1 bttv
> compat_ioctl32 5569 1 bttv
> i2c_algo_bit 12873 1 bttv
> btcx_risc 9161 1 bttv
> tveeprom 18513 1 bttv
> videodev 27073 1 bttv
> v4l2_common 26305 2 bttv,videodev
> i2c_core 25537 5
> bttv,i2c_algo_bit,tveeprom,i2c_ec,i2c_i801
>
>
>
Ok, with a new card that may be compatible, the driver may not recognize
it by the numbers.
ATI Technologies Inc Unknown
from your lspci may be an indication of this type of problem.
In the case where a driver will work with a device newer than the system device catalog (the hwdata rpm) you can specify the device ID on the modprobe command line and in the /etc/modprobe.conf.
The descriptions of the device on each line of lspci comes from the hardware database, /usr/share/hwdata/pci.ids (from the hwdata rpm). If the number does not match, it prints the number instead of the description. In your case: 'ATI Technologies Inc Unknown device 4d52' means that the vendor ID was found, but NOT the device ID (45d2). Try lspci -n to see just the numbers.
So, you have two things to try.
Simply edit the /usr/share/hwdata/pci.ids file and add a line that will work. The confusing part here for me is the ATI description and your description don't match. The TV-Wonder series is by Brooktree, not ATI.
But in any case, that file will give you lots of clues to google for.
And, a 'yum update hwdata' may be all it takes to fix it in the first place.
Good luck.
More information about the users
mailing list