FC6: No display on screen; Savage Video Card: Solved
rajesh.padalia at qatar.net.qa
rajesh.padalia at qatar.net.qa
Fri Jan 5 13:29:00 UTC 2007
Hi List,
I manage to resolve this issue. I don't know how! what I did is reinstalled FC6 with Feodra Extras selected. I think there is some update on Savage driver in Fedora Extras.
Cheers!
Thanks and best regards,
Rajesh
----- Original Message -----
From: rajesh.padalia at qatar.net.qa
Date: Friday, January 5, 2007 10:22 am
Subject: FC6: No display on screen; Savage Video Card
> Hi List,
>
> I just installed FC6 on my old computer. everything was fine until
> I rebooted computer. I did install in graphic mode. My S3 Savage4
> video card (32MB RAM) and Benq FP767-12 LCD Monitor were correctly
> identified. However on boot display is going blank.
>
> I tried Xorg -configure, which generated attached file, however
> did not resolve issue.
> Attached below are Xorg.conf and Xorg.0.log: (last few lines).
> Please let me know if any one wnat to see full log file.
> I would appreciate help from list.
>
> Thanks...
>
> Rajesh
> ====================================
> xorg.conf:
> ----------
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/usr/share/X11/rgb"
> ModulePath "/usr/lib/xorg/modules"
> FontPath "unix/:7100"
> FontPath "built-ins"
> EndSection
>
> Section "Module"
> Load "vnc"
> Load "record"
> Load "dbe"
> Load "glx"
> Load "xtrap"
> Load "dri"
> Load "extmod"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> #DisplaySize 340 270 # mm
> Identifier "Monitor0"
> VendorName "BNQ"
> ModelName "BenQ FP767-12"
> ### Comment all HorizSync and VertSync values to use DDC:
> HorizSync 31.0 - 83.0
> VertRefresh 56.0 - 76.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "HWCursor" # [<bool>]
> #Option "SWCursor" # [<bool>]
> #Option "ShadowFB" # [<bool>]
> #Option "Rotate" # [<str>]
> #Option "UseBIOS" # [<bool>]
> #Option "LCDClock" # <freq>
> #Option "ShadowStatus" # [<bool>]
> #Option "CrtOnly" # [<bool>]
> #Option "TvOn" # [<bool>]
> #Option "PAL" # [<bool>]
> #Option "ForceInit" # [<bool>]
> #Option "Overlay" # [<str>]
> #Option "TransparencyKey" # [<str>]
> #Option "ForceInit" # [<bool>]
> #Option "DisableXVMC" # [<bool>]
> #Option "DisableTile" # [<bool>]
> #Option "DisableCOB" # [<bool>]
> #Option "DRI" # [<bool>]
> #Option "BCIforXv" # [<bool>]
> #Option "DVI" # [<bool>]
> #Option "BusType" # [<str>]
> #Option "DmaType" # [<str>]
> #Option "DmaMode" # [<str>]
> #Option "AGPMode" # <i>
> #Option "AGPSize" # <i>
> Identifier "Card0"
> Driver "savage"
> VendorName "S3 Inc."
> BoardName "Savage 4"
> BusID "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
> ====================================
> Xorg.0.log: (last few lines)
> -----------------------------
>
> (**) Keyboard0: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
> (II) Mouse0: ps2EnableDataReporting: succeeded
> (II) SAVAGE(0): [drm] removed 1 reserved context for kernel
> (II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xcfc4c000 at
> 0xb7f67000FreeFontPath: FPE "unix/:7100" refcount is 2, should be
> 1; fixing.
>
>
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
More information about the users
mailing list