FC7: No USB stick automount after latest kernel update

[Schlueri]

Hi there, 

today i've installed the latest kernel update kernel-2.6.22.1-27.fc7.
Now my USB stick doesn't automount, with kernel-2.6.21-1.3228.fc7 a
desktop icon appears. Manual mounting the stick works without problems.
It's a DELL Inspiron 9300 notebook.

With a USB harddisk the automount works as before. Any hints? 

Here the logfile for the usb stick:

usb 5-8: new high speed USB device using ehci_hcd and address 4
usb 5-8: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     TOSHIBA  TransMemory      1.04 PQ: 0
ANSI: 0 CCS
sd 2:0:0:0: [sdb] 2004992 512-byte hardware sectors (1027 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 2004992 512-byte hardware sectors (1027 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0

To see the difference, here the logfile with a usb harddisk:

Jul 21 20:47:45 merlin kernel: usb 5-1: new high speed USB device using
ehci_hcd and address 5
Jul 21 20:47:45 merlin kernel: usb 5-1: configuration #1 chosen from 1
choice
Jul 21 20:47:45 merlin kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Jul 21 20:47:49 merlin NetworkManager: <info>  Error getting killswitch
power: org.freedesktop.Hal.Device.KillSwitch.NotSupported - Access type
not supported 
Jul 21 20:47:50 merlin kernel: scsi 3:0:0:0: Direct-Access     SAMSUNG
SV1204H          0000 PQ: 0 ANSI: 0
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] 234493056 512-byte
hardware sectors (120060 MB)
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] Write Protect is off
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] Assuming drive cache:
write through
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] 234493056 512-byte
hardware sectors (120060 MB)
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] Write Protect is off
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] Assuming drive cache:
write through
Jul 21 20:47:50 merlin kernel:  sdb: sdb1
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
Jul 21 20:47:50 merlin kernel: sd 3:0:0:0: Attached scsi generic sg2
type 0
Jul 21 20:47:52 merlin kernel: kjournald starting.  Commit interval 5
seconds
Jul 21 20:47:52 merlin kernel: EXT3 FS on sdb1, internal journal
Jul 21 20:47:52 merlin kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Jul 21 20:47:52 merlin hald: mounted /dev/sdb1 on behalf of uid 500

Thanks for help
Dirk