How to use flash drive ?
Richard England
rlengland at verizon.net
Sun Jun 17 17:08:51 UTC 2007
Bob Goodwin - W2BOD wrote:
>
> I received a Father's day gift - PNY 4 Gig flash drive.
>
> FC-6 sees it as /dev/sdc1, /media/USB2FD and fdisk reports as below.
> How do I
> Use this gadget? I think I saw something on the list advising
> not to reformat or change the file system?
>
> Can I use it as is and how do I deal with it?
>
> Bob Goodwin
>
>
> Disk /dev/sdc1: 4127 MB, 4127178752 bytes
> 127 heads, 62 sectors/track, 1023 cylinders
> Units = cylinders of 7874 * 512 = 4031488 bytes
>
> This doesn't look like a partition table
> Probably you selected the wrong device.
>
> Device Boot Start End Blocks Id System
> /dev/sdc1p1 ? 245877 481063 925929529+ 68 Unknown
> Partition 1 has different physical/logical beginnings (non-Linux?):
> phys=(116, 100, 32) logical=(245876, 10, 29)
> Partition 1 has different physical/logical endings:
> phys=(288, 101, 46) logical=(481062, 82, 59)
> Partition 1 does not end on cylinder boundary.
> /dev/sdc1p2 ? 168934 237384 269488144 79 Unknown
> Partition 2 has different physical/logical beginnings (non-Linux?):
> phys=(357, 32, 43) logical=(168933, 92, 47)
> Partition 2 has different physical/logical endings:
> phys=(0, 13, 10) logical=(237383, 108, 42)
> Partition 2 does not end on cylinder boundary.
> /dev/sdc1p3 ? 68452 246045 699181456 53 OnTrack DM6
> Aux3
> Partition 3 has different physical/logical beginnings (non-Linux?):
> phys=(345, 32, 19) logical=(68451, 100, 18)
> Partition 3 has different physical/logical endings:
> phys=(324, 77, 19) logical=(246044, 29, 49)
> Partition 3 does not end on cylinder boundary.
> /dev/sdc1p4 ? 177119 177121 10668+ 49 Unknown
> Partition 4 has different physical/logical beginnings (non-Linux?):
> phys=(87, 1, 0) logical=(177118, 8, 36)
> Partition 4 has different physical/logical endings:
> phys=(335, 78, 2) logical=(177120, 98, 44)
> Partition 4 does not end on cylinder boundary.
>
> Partition table entries are not in disk order
>
>
I have a 1GB device from Memorex that shows up as follows. Just us it
as any other file system. You should be able to drag and drop, or use
the CLI to mkdir, rm, etc. It is a VFAT partition and the system will
know how to handle it.
~~R
# fdisk -l /dev/sdb1
Disk /dev/sdb1: 1031 MB, 1031782400 bytes
32 heads, 62 sectors/track, 1015 cylinders
Units = cylinders of 1984 * 512 = 1015808 bytes
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdb1p1 ? 857863 1679192 814758329+ 74 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(288, 110, 36) logical=(857862, 6, 45)
Partition 1 has different physical/logical endings:
phys=(366, 104, 37) logical=(1679191, 5, 29)
Partition 1 does not end on cylinder boundary.
/dev/sdb1p2 ? 670456 942118 269488144 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(107, 121, 32) logical=(670455, 23, 47)
Partition 2 has different physical/logical endings:
phys=(10, 121, 13) logical=(942117, 5, 42)
Partition 2 does not end on cylinder boundary.
/dev/sdb1p3 ? 271669 976489 699181456 53 OnTrack DM6 Aux3
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(345, 32, 19) logical=(271668, 1, 18)
Partition 3 has different physical/logical endings:
phys=(324, 77, 19) logical=(976488, 1, 49)
Partition 3 does not end on cylinder boundary.
/dev/sdb1p4 ? 1970322 1970355 32669+ bb Boot Wizard hidden
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(65, 1, 0) logical=(1970321, 27, 29)
Partition 4 has different physical/logical endings:
phys=(96, 0, 7) logical=(1970354, 25, 19)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
More information about the users
mailing list