usb stick, can't mount

[Gene Heskett]

Greetings all;

I just mounted, as a vfat filesystem, a 64meg usb key/stick, wrote one file
to it on a debian/kubuntu 6.06 LTS system, unmounted it and and brought it in
here and plugged it into the FC6 box, on a usb1.1 hub also, but I cannot mount it.

usb_storage is loaded according to lsmod.  Here is the stanza from the log when I plug it in:

May 10 13:24:42 coyote kernel: scsi2 : SCSI emulation for USB Mass Storage devices
May 10 13:24:47 coyote kernel: scsi 2:0:0:0: Direct-Access     Staples                   0.00 PQ: 0 ANSI: 2
May 10 13:24:47 coyote kernel: scsi 2:0:0:0: Attached scsi generic sg4 type 0
May 10 13:29:03 coyote kernel: usb 2-2.1: USB disconnect, address 4
May 10 13:29:05 coyote kernel: usb 2-2.2: new full speed USB device using ohci_hcd and address 5
May 10 13:29:05 coyote kernel: usb 2-2.2: not running at top speed; connect to a high speed hub
May 10 13:29:05 coyote kernel: usb 2-2.2: configuration #1 chosen from 1 choice
May 10 13:29:05 coyote kernel: scsi3 : SCSI emulation for USB Mass Storage devices
May 10 13:29:10 coyote kernel: scsi 3:0:0:0: Direct-Access     Staples                   0.00 PQ: 0 ANSI: 2
May 10 13:29:10 coyote kernel: scsi 3:0:0:0: Attached scsi generic sg4 type 0

And of course sg4 is assumed to be the loader robot for the 5th robotic scsi
tape drive the last I knew.

Shouldn't it be available as /dev/sda1?  It always has been before, quite a few times.

Kernel is 2.6.21.1-cfs-v10

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Windows: XT emulator for an Pentium.