IBM eserver 325, not able to detect CPU and Ethernet cards

[Jim van Wel]

Hi there,

Try starting without ACPI. So edit your grub lines with startup with "E".
Then at the kernel line on the end add:

noapic nolapic acpi=off pci=noacpi

Or only:

pci=noacpi

And try to boot.

Greetings,
Jim.

> On 5/18/07, Jim van Wel <jim at coolzero.info> wrote:
>>
>> Hi there,
>>
>> 1. Are you using a SMP kernel? Second, try FC6.
>
>
> Hi  after upgrade to FC6 iam getting this error
> while starting
>
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP15] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP16] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP17] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP18] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP19] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP1C] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP1D] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP1E] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP1F] (IRQs) *0, disabled.
> ACPI: PCI Interrupt Link [LPUS] (IRQs *11)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 13 devices
>